{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Machine tap Form B, vaporised, M: M2
Article no.: 132150 M2
Article code:
Product details
Technical Data
| Thread type | M | |
| Tool material | HSS-E | |
| Coating | vaporised | |
| Thread D | M2 | |
| Thread pitch | 0.4 mm | |
| Core hole diameter | 1.6 mm | |
| Nominal diameter of metric thread D | 2 mm | |
| Overall length L | 45 mm | |
| Shank diameter DS | 2.8 mm | |
| Square-drive width across flats □ | 2.1 mm | |
| Thread tolerance class | ISO 2X 6HX | |
| Taper lead form | B | |
| Application for type of drilling | through hole | |
| Twist angle | 0 degrees | |
| Standard | DIN 371 | |
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Maschinen-Gewindebohrer Form B M M2 | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00282105 | |
| Length of shank LS | 32 mm | |
| Chisel edge diameter | 1.6 mm | |
| Length of tapping part Lc | 11 mm | |
| Tap infeed length | 1.2 mm | |
| Taper lead angle | 8 degrees | |
| Number of teeth | 2 | |
| Twist direction | neutral, straight | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Cutting part version | with lubrication groove and dirt trap groove | |
| To depth (x diameter) | 3 | |
| Number of clamping slots | 2 | |
| Flank angle | 60 degrees | |
| Cutting media, manufacturer’s designation | HSS-E | |
| Interface | joint 1 | |
| Gauge length A | 45 mm | |
| Weight | 5 g | |
| Cutting direction | right-hand cutting | |
| Colour ring | blue | |
| Type of product | taps |
Identification & Classification
| Article number | 132150 M2 | |
| EAN / GTIN | 4045197071101 | |
| Manufacturer number | 132150 M2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
13
P
15
P
15
P
15
M
6
N
13
Description
Version:
Particularly sturdy design.
Guide section with oil grooves, but without chip flutes. Lead chamfer form B, with strong spiral point. Size M2.6 to the old DIN profile.
Guide section with oil grooves, but without chip flutes. Lead chamfer form B, with strong spiral point. Size M2.6 to the old DIN profile.
Advantage:
Optimum self-guidance and no recutting when reversed.