{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Small cable cutter with 2-component grips VDE insulated, overall length: 160mm
Article no.: 730355 160
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
The graduations hold the cores in a suitable position: the cut is up to 40% easier than for standard cable cutters of the same length.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Tested up to | 1,000 V | |
| Quality and test seal | VDE | |
| ESD protected area (EPA) | no | |
| Colour | yellow; red | |
| Type of product | cable cutters | |
| Cutting capacity | 50 mm2 | |
| Scissors features | Protection against trapping fingers | |
| Suitable for diameter | cable (external diameter) | |
| Max. diameter, cable (external diameter) | 15 mm | |
| Suitable for cross-section | przewód aluminiowy; Cu cable, multi-wired | |
| Max. cross-section | 50 mm2; 50 mm2 | |
| Handle feature | 2-component handle | |
| Standard | DIN EN IEC 60900 | |
| Material | special tool steel | |
| Surface | polished | |
| Overall length | 160 mm | |
| Content | single part |
Identification & Classification
| Article number | 730355 160 | |
| EAN / GTIN | 4003773085966 | |
| Manufacturer number | 95 16 160 | |
| Manufacturer/responsible person | KNIPEX-Werk C. Gustav Putsch KG, Oberkamper Straße 13, 42349 Wuppertal, Germany, www.knipex.de |
Description
Version:
Handles with insulation up to 1000 volts to DIN EN IEC 60900 / VDE 0682-201.
Handles with multi-component coverings.
Less force required: separate cores or wires are cut through successively by the stepped blades. Cuts through solid copper and aluminium cables up to 5 × 4 mm2.
Polished head with sickle-shaped blades. Cuts without crushing.
Handles with multi-component coverings.
Less force required: separate cores or wires are cut through successively by the stepped blades. Cuts through solid copper and aluminium cables up to 5 × 4 mm2.
Polished head with sickle-shaped blades. Cuts without crushing.
Application:
For cutting copper and aluminium cables.
Material:
Special tool steel, drop-forged.