Hoffmann Group Home
  • 500.000 listed articles
  • Highest delivery accuracy
  • TÜV certified quality of delivery
      • Menu
      Item no.: 231605

      HiPer-Drill base body 3×D

      Brand: GARANT
      Skaft ISO 9766
      Drill depth up to 3×D
      Through-coolant true
      Use for drilling limited cross-drilling
      Use for drilling limited drilling through a stack
      Use for drilling limited oblique spot drilling
      Use for drilling limited drilling with oblique exit
      No price available

      HiPer-Drill base body 3×D

      In stock

      Description

      Version:

      • Very high feed rates and maximum performance due to optimally matched geometries and materials.
      • Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
      • High concentricity when assembled.
      • Shank support for optimum stability in operation.

      Application:

      For stationary and rotating use. For holes up to IT9 accuracy.

      Note:

      The insert screw must be replaced after every fifth change of cutter insert.
      Further sizes up to ⌀ 50.99 mm available on request.
      Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
      For optimum stability, clamp the drill so the overhang is as short as possible.

      Technical Data

      Drill depth up to
      3×D 
      Use for drilling
      limited cross-drilling ; limited drilling through a stack ; limited drilling with oblique exit ; limited oblique spot drilling 
      Through-coolant
      yes 
      Skaft
      ISO 9766