{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
HiPer Drill base body, 5×D, ⌀ DC: 9mm
Article no.: 231610 9
Article code:
Product details
Technical Data
| Through-coolant | yes; yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Series | HiPer Drill | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Interface coding | ZYL01201115 | |
| Holder shape | with longitudinal slot | |
| Holder version | metric | |
| Holder size, metric | 0120 mm | |
| Type of mounting | spigot | |
| Shank diameter | 12 mm | |
| Shank length | 45 mm | |
| Cutter diameter, min. | 9 mm | |
| Number of cutting edges, total | 2 | |
| Guide elements | without guide elements | |
| Insert thickness | 3.2 mm | |
| Type of fastening for insert | P (with cyl. hole clamped via hole) | |
| Interface coding for insert | HOG-2316xx090 | |
| Insert designation | 231640 9 | |
| Interface | joint 1 | |
| Gauge length | 65 mm | |
| Usable length | 48 mm | |
| Overall length | 110 mm | |
| Weight | 53 g | |
| Cutting direction | right-hand cutting | |
| Machining method | drilling into solid material | |
| Type of product | indexable drill for cutter inserts |
Identification & Classification
| Article number | 231610 9 | |
| EAN / GTIN | 4045197716163 | |
| Manufacturer number | 231610 9 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled. (For holes up to IT9 accuracy)
- Shank support for optimum stability in operation.
Created by an additive procedure.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.