{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cut-resistant arm protection Cut C, Length: 45cm
Article no.: 094596 45
Copy
Article code:
Copy
- Glove characteristics: Silicone-free; DMF-free
- Cut protection class: C
Product details
Technical Data
| Glove characteristics | Silicone-free; DMF-free | |
| EN 388 | 3X4XC | |
| Cut protection class | C | |
| Application | reusable | |
| Backing material | HPPE | |
| Colour | grey | |
| Length | 450 mm | |
| AQL | G-II 1.0 for critical, G-II 2.5 for major, G-II 4.0 for minor. | |
| Contact heat up to | 100 °C | |
| Contents | 1 | |
| Type of product | Arm cut-protection |
Identification & Classification
| Article number |
094596 45
Copy |
|
| EAN / GTIN |
4062406133009
Copy |
|
| Manufacturer number |
094596 45
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
HOLEX Cut C. Arm protection with cut protection level C for activities with high cut hazards. With thumb hole.
Standard:
EN 388; EN ISO 21420
Supplied with:
1 pc. arm protection.
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Protect arms against mechanical risks, abrasions and cutting hazards.
- Can be combined with cut-resistant glove.
- Optimum protection is obtained only when the area to be protected is completely covered. The arm protector must not be allowed to slip.
Reasonably foreseeable misuse
- Offers no protection against chemical, microbiological, thermal or electrical hazards.
- Do not wear when close to rotating machine parts.
- Do not continue using following contact with sharp-edged items.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.