{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Absolute dial indicator 0.01 mm reading, Measuring range: 12,5mm
Article no.: 434065 12,5
Copy
Article code:
Copy
New product
Click to enlarge image
Display can be rotated up to 330°.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Standard: Works standard
- Interface: USB interface; USB interface
- IP Index of Protection: IP 42
- Measured value saving: Once-off setting of the zero position
Product details
Technical Data
| Standard | Works standard | |
| Measuring range | 0 mm - 12.5 mm | |
| Scale divisions | 0.01 mm | |
| Height of numerals | 11 mm | |
| Display backlit | no | |
| Measurement variation E MPE (measurement range) | 0.02 mm | |
| Interface | USB interface; USB interface | |
| IP Index of Protection | IP 42 | |
| Gauging force | ≤0.9 N | |
| Clamping shank ⌀ h6 | 8 mm | |
| Clamping shank length | 17 mm | |
| Measured value saving | Once-off setting of the zero position | |
| Preset function | yes | |
| Measurement technology | digital | |
| Body ⌀ | 59 mm | |
| Thickness of housing | 38.1 mm | |
| Loop on the back of the dial indicator | no | |
| Power supply | Battery-powered | |
| Number of batteries contained | 1 | |
| Battery type | Button cell | |
| Article no of the battery / rechargeable battery fitted | 081560 CR2032 | |
| Type of product | dial gauge | |
| On/Off switch | yes |
Identification & Classification
| Article number |
434065 12,5
Copy |
|
| EAN / GTIN |
4946368850153
Copy |
|
| Manufacturer number |
543-710B
Copy |
|
| Manufacturer/responsible person | Mitutoyo Deutschland GmbH, Borsigstraße 8-10, 41469 NEUSS, Germany, www.mitutoyo.de |
Description
Version:
A multifunctional standard dial indicator. Reliable and easy to use.
- Bidirectional communication is possible, e.g. for parameterisation via PC (Digimatic S1 interface).
- With ABSOLUTE system. One-off setting of the start position, which remains the absolute zero point until the battery has to be replaced.
- Easy reading of the values due to a large digital/analogue display.
- Model available with digital digit increments of 0.5 µm.
- Simple calculations and peak value identification are possible.
- Equipped with a warning function for the calibration plan.
- The GO/±NG assessment is performed by adjusting the upper and lower tolerance.
- Alarm for low voltage, setting error, sensor error, display overflow etc.
- Display can be rotated 330°.
- A function lock protects the dial indicator against unauthorised use.
Function:
IP42: Protected against water falling obliquely (dripping water) up to 15° relative to normal operating position and protected against penetration by foreign bodies with ⌀ > 1 mm However, tools and wires should be kept away.
Cutting data:
- Absolute linear encoder with electrostatic capacity.
- Measuring frequency (MAX/MIN/RANGE): 50× per second.
- Shank diameter: 8 mm.
- Measuring probe: carbide ball, thread M2.5×0.45.
- Battery life: approx. 2700 hours with continuous operation.
Supplied with:
Digital dial indicator including 1 pc. CR2032 battery.