{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
NC8 NC high pressure vice, Type: 90
Article no.: 360405 90
Article code:
Product details
Technical Data
| Min. clamping range, 1 | 0 mm | |
| Series | NC8 | |
| Max. clamping range, 1 | 126 mm | |
| Manufacturer’s designation | NC-Hochdruckspanner NC8, Typ: 90 | |
| Clamping range | 1 | |
| Max. overall length L | 339 mm | |
| Base body length a | 283 mm | |
| Base body height c | 80 mm | |
| Jaw width A | 90 mm | |
| Jaw height h | 34 mm | |
| Interchangeable jaws | yes | |
| Clamping force selection | maximum clamping force | |
| Clamping force | 28 kN | |
| Tenon slots | longitudinal slot; cross-slot | |
| Transverse slot width n | 20 mm | |
| Width of longitudinal groove l | 20 mm | |
| With bore | yes | |
| Hole diameter D | 25 mm | |
| Pitch | 200 | |
| With thread | yes | |
| Number of threads | 3 pcs. | |
| Thread size M | M10 | |
| Version | zero-point clamping system | |
| Weight | 15 kg | |
| Material | spheroidal graphite iron | |
| Surface | ground; nitrided | |
| Accuracy | 0.02 mm | |
| Type of product | machine vice |
Identification & Classification
| Article number | 360405 90 | |
| EAN / GTIN | 4250364403252 | |
| Manufacturer number | 6921908000055 | |
| Manufacturer/responsible person | ALLMATIC-Jakob Spannsysteme GmbH, Jägermühle 10, 87647 Unterthingau, Germany, www.allmatic.de |
Description
Version:
Compact size: Optimum ratio between clamping range and overall length. The clamping force can be pre-set without using tools: in 11 steps: Jaw width 90 mm, in 4 steps: Jaw width 125 / 160 / 200 mm. Particularly rigid base body of GJS-60, top and bottom faces ground; pairing accuracy 0.02 mm.
Feature:
Fully enclosed low-maintenance nitrided spindle!
Feature:
Fully enclosed low-maintenance nitrided spindle!
- Increased service reliability.
- Optimised swarf protection.
- Minimised cleaning requirement.
With 25H6 M10 holes at 200 mm pitch for zero-point clamping system.
Application:
Can be used horizontally or laterally, since the side faces are ground to an accuracy of -0.05 mm.
Supplied with:
2 stepped jaws (= standard!), 1 crank handle, 4 table clamps.
Optional extras:
- Clamping stud No. 360025 - 25 M10.
Note:
- No end face holes for extensions included!