{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Tyrolit abrasive belt CERABOND X 75x2000 CA50 PE Y steel/inox
Article no.: 34572500
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Series | CERABOND X | |
| Manufacturer’s designation | CERABOND X Bänder; PREMIUM CERABOND X Bänder | |
| Abrasive media width | 75 mm | |
| Abrasive media length | 2,000 mm | |
| Propulsive equipment | tape machines | |
| Grit designation | medium | |
| Grinding media backing | Fabric | |
| Type of product | Linishing belt | |
| Specification | CA-P94 PE Y JTS | |
| Suitable for material | stainless steel; steel | |
| Material group | Metal | |
| Characteristics | cooling coating |
Identification & Classification
| Article number | 34572500 | |
| EAN / GTIN | 9003173138373 | |
| Manufacturer number | 34572500 | |
| Manufacturer/responsible person | Tyrolit AG, Swarovskistraße 33, 6130 Schwaz, Austria, www.tyrolit.de |
Description
Description:
- The new PREMIUM CERABOND X belts with self-sharpening, ceramic grain offer maximum stock removal rates in the shortest possible time on steel and stainless steel.
- The self-sharpening effect gives you a consistently good surface result over the entire lifetime of the tool.
- At the same time, the condition of the abrasive belt reduces the workload for the operator, as less pressure is required.
- An additional cooling layer reduces the generation of heat during grinding and ensures a cool finish.
- With CERABOND X, you are ideally equipped for any challenge.
Feature:
- Form: Cloth Belt
- Specification : CA-P94 PE Y JTS CA50
- Dimension (W x C): 75 x 2000 mm
- Thickness: 75 mm
- Drill hole: 2000 mm
- Grain size: 50
- Material suitability: Steel;Stainless steel
- Product line: PREMIUM
- Tool for: Stationary belt grinder
Advantage:
- Highest possible stock removal thanks to the use of ceramic grain
- Self-sharpening grain for constantly good surface result combined with reduced operator workload
- Coolant layer for very cool grinding
Application:
- Grit size 24/36/40 for maximum stock removal
- Grit size 60/80/120 for a perfect surface finish
Material:
- Steel/Stainless steel
- Steel/Stainless steel
Suitable for:
- Stationary belt grinder
Recommendation:
- Grit size 24/36/40 for maximum stock removal
- Grit size 60/80/120 for a perfect surface finish
Note:
- For grinding regular and hard steel and stainless steel using belt sanders