{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Eco toolholder axial single, right-hand, PSC 63, for toolholder square: 25mm
Article no.: 318851 25
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Series | Eco | |
| Manufacturer’s designation | eco Werkzeughalter | |
| Holder type | polygonal hollow shank taper with flat surface contact | |
| Holder version | dimensionless nominal size without cooling | |
| Holder size, no dimensions | 63 | |
| Type of mounting | hole (internal mounting) | |
| Shank length | 74 mm | |
| Interface on machine side | PSC 63 | |
| Gauge length | 130 mm | |
| Functional length | 102 mm | |
| Functional height | 25 mm | |
| Tool position | right-hand | |
| With cooling channel bore | yes | |
| Interface | joint 1; joint 2 | |
| Type of product | VDI tool holders | |
| Overall length | 168 mm | |
| Overall height | 108 mm | |
| Overall width | 40 mm | |
| Standard | DIN ISO 10889; ISO 26623-2 | |
| Through-coolant available | yes | |
| Material | steel | |
| Weight | 3.477 kg | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 318851 25 | |
| EAN / GTIN | 4045197893291 | |
| Manufacturer number | 318851 25 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
GARANT - Optimisation of tool life, better surface finishes, increased process reliability and increased productivity due to GARANT eco.
GARANT - Optimisation of tool life, better surface finishes, increased process reliability and increased productivity due to GARANT Eco.
GARANT - Optimisation of tool life, better surface finishes, increased process reliability and increased productivity due to GARANT Eco.
Application:
For use on lathes and milling centres.
For mounting ISO toolholders with square shanks.
For mounting ISO toolholders with square shanks.
Note:
PSC clamping stud on request.
With pass-through shim. Suitable for toolholders with shank 20 and 25 mm.