{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Alternative article:
-
Article no.: 309595 40
ER clamping nut High Speed, for ER: 40
Article no.: 309610 40
Article code:
Find similar products here:
Product details
Technical Data
| Manufacturer’s designation | ER-Spannmutter High Speed | |
| Outer diameter D | 63 mm | |
| Overall height h | 26 mm | |
| Balance quality G at rotational speed | G 2.5 at 25,000 rpm | |
| Thread size d | M50×1,5 | |
| Thread pitch P | 1.5 mm | |
| Type of product | clamping nut | |
| Thread type | metric ISO fine thread | |
| Maximum tightening torque | 240 Nm | |
| Standard | DIN 6499D | |
| Nut shape | groove |
Identification & Classification
| Article number | 309610 40 | |
| EAN / GTIN | 4045197292100 | |
| Manufacturer number | 309610 40 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Thread and taper ground in a single setup for highest concentricity.
Nut coated for: lower friction and increased clamping force coupled with high wear resistance and corrosion resistance.
Nut coated for: lower friction and increased clamping force coupled with high wear resistance and corrosion resistance.
With slots.
Suitable for:
All standard ER collet chucks.
Optional extras:
ER clamping wrench, No. 309680 − 309740.
Single open ended spanner (for size 16), No. 613300 size 25.
Single open ended spanner (for size 16), No. 613300 size 25.
Note:
Collet chuck and clamping nut are balanced separately!