This article is no longer part of the assortment. If you are looking for an alternative, please note the links or get in contact with us.

Alternative article:

Indexable insert for turning WNMG 080408, for finish machining

Article no.: 252014 PR015S

Number of teeth		6 pcs.
Cutter version		rounded (E)
Insert designation		WNMG080408
Grade		PR015S
Tool material		Carbide
Machining group		S (difficult-to-machine materials)
Corner radius R		0.8 mm
Coating		Megacoat Hard
Tolerance Class		M
Type of chip breaker		MQ
Base form		triangular, with enlarged corner angles
Thickness of insert S		4.76 mm
Length of cutting edge l		8.7 mm
Height of cutting edge		4.76 mm
Diameter of insert d		12.7 mm
Corner angle		80 degrees
Rake angle		23 degrees
Normal clearance angle (main cutting edge)		0 degrees
Normal clearance angle (auxiliary cutting edge)		0 degrees
ISO-Code		WNMG 080408
Attachment hole diameter		5.16 mm
Machining group, manufacturer-specific		S15
Cutting media, manufacturer’s designation		PR015S
Insert thickness T		4.76 mm
Interface coding for insert according to ISO TS 13399-60		WN0804082N
Type of product		cutter insert
With ISO code		yes
Direction of action		neutral
Suitable for material		heat-resistant super-alloys (S)
Finishing / roughing assignment		finishing
Type of fastening		hole
Chip breaker		yes
Cutting conditions		interrupted
Number of potential uses		6 pcs.
Weight		10 g
Content		single part

Article number		252014 PR015S
EAN / GTIN		4960664837601
Manufacturer number		TLJ08627
Manufacturer/responsible person		KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de