PFERD TOOLS Tube brush IBU dia. 13x25 mm shank dia. 3.7 mm aluminium oxide filament dia. 0.30 grit 600

Nr art.: 4007220037324
Cena za 1 Sztuka
plus podatek VAT w obowiązującej wysokości Ceny plus koszty dostawy
Indywidualne ceny dla klientów biznesowych po zalogowaniu.
  • Minimalna ilość zamówienia 10 Sztuka
  • Etapy zamówienia: 10 Sztuka
na zamówienie
Czas realizacji ok. 4-6 dni roboczych
0 sztuk w magazynie

Wybierz rozmiar artykułu i ilość

Cena za 1 Sztuka (z VAT)

Dostępność

UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi. Informacje

Dodaj do listy artykułów

Udostępnij ten produkt

lub skopiować ten link

Szczegóły produktu

Dane techniczne

Odcień, Szare Srebrny szary
Odcień, Białe Biały sygnałowy
Seria IBU
Oznaczenie producenta Innenbürste IBU Ø13x25 mm Schaft-Ø3,7 mm Aluminium-Oxid-Filament-Ø0,30 Korn 600
Strefa ochrony ESD (EPA) nie
Kolor Szare; Białe

Identyfikacja i klasyfikacja

Numer artykułu 4007220037324
EAN / GTIN 4007220037324
Numer producenta 43679639
Numer L L51510 227
Producent/osoba odpowiedzialna August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 Marienheide, Deutschland, www.pferd.com

Opis

Opis:

  • For light deburring, cleaning of holes and cross holes and for work on surfaces.
  • Brushes with aluminium oxide (AO) are less sharp-edged and aggressive compared with SiC.
  • They are primarily suitable for polishing and smoothing finishes on soft metals.
  • Plastic filament withstands temperatures up to 220 °C.

Cecha szcz.:

  • Max. RPM: 2000 RPM
  • Width, metric: 25 mm
  • Mounting system: Shank
  • Dia. filament material: 0.3 mm
  • Dia. external, metric: 13 mm
  • Dia. shank, metric: 3.7 mm
  • Filament material: Aluminium oxide (AO)
  • Grit size: 600
  • Length, total: 125 mm

Zaleta:

  • Enable maximum precision and efficiency in work on delicate workpieces.
  • Highly flexible, enabling optimal adjustment to the workpiece contour.
  • The dimensional accuracy of the workpieces remains unchanged.
  • With tube brushes with a short eyelet, the filament reaches up to the tip of the brush.
  • The bent end of the wire does not have any sharp edges, which prevents delicate surfaces from getting scratched.

Zastosowanie:

  • Recommendations for use: Use coolant for applications where large amounts of heat are produced. Please observe the recommended rotational speeds. Use with clockwise rotation.
  • Applications: Cleaning; Deburring
  • Drive types: Flexible shaft drive; Manual application; Power drill

Materiał:

  • Materials that can be worked:
    • Aluminium
    • Bronze
    • Cast iron
    • Cast steel
    • Cobalt-based alloys
    • Other non-ferrous metals
    • Steel, cast steel
    • Steel materials with a hardness > 54 HRC
    • Steels up to 1,200 N/mm² (< 38 HRC)
    • Materials that can be worked: Aluminium; Bronze; Cast iron; Cast steel; Cobalt-based alloys; Other non-ferrous metals; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)

Wskazówka:

  • For safe use, guide the brush into the workpiece before commencing any work.
  • When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Pliki do pobrania i dokumenty

Z tej samej serii "IBU" Zobacz wszystkie

Doradcy ds. usług i produktów

Ulotki

If you see this, something went wrong, or you disabled javascript

Formularze

If you see this, something went wrong, or you disabled javascript

Promocje

If you see this, something went wrong, or you disabled javascript

Zaloguj się

Nie masz jeszcze konta w eShop?

Logowanie

Twoja osoba kontaktowa

Ustal prowizję

Karta klienta

Prosimy o okazanie kodu QR przy kasie.
Pobrano w dniu 

W koszyku

Do koszyka
Do koszyka