{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
UniKlamp UK 160/80
Codice art.: UK16
Codice materiale:
Si prega di notare i tempi di consegna prolungati:
Questo articolo si ordina direttamente dal produttore, poiché non fa parte del nostro catalogo e pertanto non è disponibile a magazzino.
InfoDettagli prodotto
Dati tecnici
| Tipo morsetto | Strettoio per serrare in parallelo | |
| Apertura max a; b | 160 mm | |
| Sporgenza max. | 80 mm | |
| Spessore guida di scorrimento | 5 mm | |
| Larghezza guide scorrevoli | 20 mm | |
| Forza di serraggio max. F | 1.500 N | |
| Larghezza di espansione min. | 172 mm | |
| Serie | UniKlamp | |
| Colore | grey; red; black | |
| Esecuzione | es. liscia | |
| Materiale cappuccio di protezione | plastica | |
| Tipo di prodotto | Morse | |
| Sporgenza min. c | 80 mm | |
| Larghezza di espansione max. | 270 mm | |
| Materiale bracci di serraggio | plastica | |
| Materiale della guida di scorrimento | acciaio | |
| Filettatura mandrino | Filettatura trapezoidale | |
| Modalità operativa | A due mani | |
| Per | legno | |
| Con piattello di pressione | sì | |
| Forma della superficie di serraggio | es. angolare | |
| Superfici di serraggio con cappuccio protettivo | sì | |
| Numero | 1 pz. | |
| Contenuto | parte singola |
Identificazione e classificazione
| Codice articolo | UK16 | |
| EAN / GTIN | 4008158027197 | |
| Codice del produttore | UK16 | |
| Numero-L | L80040 70 | |
| Produttore/persona responsabile | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 Bietigheim-Bissingen, Germany, www.bessey.de |
Descrizione
Aprašymas:
- Clamping force up to 1,500 N
- Parallel jaw faces with extra-large contact surfaces
- Clamping of various shapes, along the whole length of the rail
- Universally applicable
- Light and easy-to-handle
- No need for tools for switching between clamping and spreading
- On carded hang pack
Požymis:
- Overhead: 80 mm
- Material / surface:
- Upper and lower part made of reinforced PA6 plastic with inserted sheet metal parts for reinforcement
- Hollow profile rail made of steel, cold drawn, galvanized
- Spindle with trapezoidal thread made of steel rolled, burnished
- Wooden handle, water-based lacquer
- Pressure plate made of steel, cold pressed, galvanized
- Rail: 20x5 mm
- Wingspan: 160 mm
- Spreading second: 172-270 mm
Privalumai:
Parallel jaw faces
- The large, flat jaw faces made from impact‐ and fracture‐resistant reinforced polyamide are almost parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers.
- The BESSEY hollow profile rail from our own drawing plant has been especially optimised for clamps. The profile acts as a reliable reinforcement against torsional forces, while the serration prevents the clamp from slipping.
- The end stop made from impact-resistant polyamide also gives the clamp added support. It can be removed without any tools, to allow the lower arm to be quickly turned around and used for spreading.
Paskirtis:
- Interior fittings
- DIY
- Furniture and joinery works
- Large-area clamping and spreading
Pastaba:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly