{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Inserto per fresatura SOMT......ER-FL, per frese ad alto avanzamento, PR1810
Codice art.: 222091 10
Codice materiale:
Dettagli prodotto
Dati tecnici
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | SOMT100420ER-FL | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | square | |
| Wide insert B | 10.3 mm | |
| Insert version | neutral | |
| Corner angle | 90 degrees | |
| Rake face chamfer width C | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 90 degrees | |
| Setting angle | 10 degrees | |
| Normal clearance angle (main cutting edge) | 16 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 16 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | SOMT100420ER; SOMT100420ER-FL | |
| Attachment hole diameter | 4.6 mm | |
| Tool material | Carbide | |
| Standard designation for cutting medium, 2nd Priority | HC | |
| Machining group, manufacturer-specific | HC-K10 | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | PR1810 | |
| Coating | Megacoat Nano | |
| Insert thickness T | 4.58 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SOMT100420ER-FL | |
| Interface coding for insert according to ISO TS 13399-60 | SOMT100420ER-FL | |
| Insert designation | SOMT100420ER | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Facility for resharpening | no | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Weight | 2 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identificazione e classificazione
| Codice articolo | 222091 10 | |
| EAN / GTIN | 4960664026883 | |
| Codice del produttore | SOMT100420ER-FLPR1810 | |
| Produttore/persona responsabile | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Deutschland, www.kyocera-unimerco.de |
Tabella dati
K
180
Descrizione
Esecuzione:
Inserto a 4 taglienti con taglienti convessi per una forza di taglio bassa.
Uso:
La geometria FL (orientata alla superficie) è la prima scelta per la sgrossatura su macchine con bassa potenza.
Non usare per fresatura Helix, fresatura a tuffo e contornatura di pareti ripide.
Non usare per fresatura Helix, fresatura a tuffo e contornatura di pareti ripide.
Nota:
Valori indicativi per ae = 0,3×D.