{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SOMT......ER-FL, for high feed rate indexable face mills, PR1810
Article no.: 222091 10
Article code:
Product details
Technical Data
| Manufacturer’s designation | SOMT......ER-FL | |
| Base form | square | |
| Thickness of insert S | 4.58 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 10.3 mm | |
| Height of cutting edge | 4.58 mm | |
| Diameter of insert d | 10.3 mm | |
| Corner radius R | 2 mm | |
| Corner angle | 90 degrees | |
| Rake face chamfer width C | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 90 degrees | |
| Setting angle | 10 degrees | |
| Normal clearance angle (main cutting edge) | 16 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 16 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| ISO-Code | SOMT100420ER-FL | |
| Attachment hole diameter | 4.6 mm | |
| Tool material | Carbide | |
| Cutting media, manufacturer’s designation | PR1810 | |
| Coating | Megacoat Nano | |
| Insert thickness T | 4.58 mm | |
| Insert designation | SOMT100420ER | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Tolerance Class | M | |
| Finishing / roughing assignment | roughing | |
| Type of fastening | hole | |
| Chip breaker | no | |
| Number of potential uses | 4 pcs. | |
| Weight | 2 g | |
| Content | single part | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 222091 10 | |
| EAN / GTIN | 4960664026883 | |
| Manufacturer number | TLS00072 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
K
180
Description
Version:
4-edge indexable inserts with convex cutting edges for low cutting forces.
Application:
FL geometry (surface-oriented) is the first choice for roughing on lower-powered machines.
Do not use for helical, plunging or contour milling, or on steep walls.
Do not use for helical, plunging or contour milling, or on steep walls.
Note:
Standard application values for ae = 0.3×D.