{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
High-performance clamp classiX GSM 250/140
Article no.: GSM25
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Series | classiX | |
| Manufacturer’s designation | Hochleistungszwinge classiX GSM | |
| Pivot angle | 35 degrees | |
| Type of product | clamps | |
| Type of clamp | high-performance clamp | |
| Min. reach | 140 mm | |
| Max. reach | 140 mm | |
| Max. clamping force | 11,000 N | |
| Capacity max. | 250 mm | |
| Material of clamping arms | steel | |
| Thickness of slide rail | 15 mm | |
| Width of slide rails | 30 mm | |
| Material of slide rail | steel | |
| Spindle thread | trapezoidal thread | |
| Type of operation | two-handed | |
| Suitable for | steel | |
| With pressure pad | yes | |
| Content | single part |
Identification & Classification
| Article number | GSM25 | |
| EAN / GTIN | 4008158035383 | |
| Manufacturer number | GSM25 | |
| L-Number | L80030 438 | |
| Manufacturer/responsible person | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 Bietigheim-Bissingen, Germany, www.bessey.de |
Description
Description:
- Clamping force up to 11,000 N with a tightening torque of 40 Nm
- Special heat-resistant pressure plate, can be tilted by up to 35°
Feature:
- Overhead: 140 mm
- Material / surface:
- Fixed and sliding bracket made of tempered steel, galvanized
- Spindle with trapezoidal thread made of steel rolled and tempered, phosphated
- Steel toggle, galvanized
- Pressure plate made of steel, phosphated
- Rail: 30x15 mm
- Wingspan: 250 mm
Application:
- Metal construction
- Locksmith work
- High-performance clamping
Note:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean and oil the spindle regularly
- If the rail is shiny, roughen both narrow sides with emery cloth (100 grain)
- Clean and oil the pressure plate regularly