Base unit with Eluplan worktop, 40 mm, width mm / Model: 20002AC

Base frame of steel hollow section 60×40×2 mm, with integral cable channels and cable slots. Includes height adjustment screws (25 mm adjustment range). The height of the work top is adjustable from 720 − 920 mm at 25 mm intervals . Optionally with hydraulic height adjustment (max. load 300 kg). Adjustment range from 720 - 920 mm by means of a hand crank or a 230 V electric motor with inching switch. Choice of either Eluplan or Eterlux worktop. Drawer unit of sheet metal with cylinder lock, central locking and anti-tilt mechanism. Drawers of sheet metal with aluminium grip handles and labelling strips. Smooth-running drawers, Delrin 100 wheels ⌀ 28 mm with very good damping characteristics and silent opening - can be pulled out 90 % - load capacity 100 kg. With slots for drawer dividers on the inner faces.
Cable routing: Integral cable channels, cable slots, and removable side panels enable an easy and tidy cable routing. Side panels turn through 180° to allow additional cable slots.
Eluplan worktops: 40 mm thick. Suitable for laboratories and electronic areas as well as engineering workstations. Light grey marble effect plastic coating, abrasion and impact resistant surface. A central strip wood core and a matching bottom face covering ensure a non-warping worktop. The coating is anti-static and resistant to dilute acids and alkalis, also heat resistant for short periods up to approx. 250 °C. The tough and hard surface is particularly suitable for sensitive components. All edges pale grey ABS veneered.
Height adjustment: 200 mm adjustment range at 25 mm intervals (No. 920000 / 920010)

Base unit with 2 drawer units, 240 mm usable height. For drawer equipment see table.

Drawer front height (left): 80; 160 mm
Drawer front height (right): 60; 80; 100 mm

Two-tone RAL 7035 light grey / RAL 5005 signal blue powder-coated.