{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Electronic torque testing wrench, maximum torque: 10N·m
Article no.: 655360 10
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Beschreibung der Legende siehe Beschreibungstext.
Product details
Technical Data
| Liczba dołączonych akumulatorów | 1 szt. | |
| Rodzaj akumulatora | Niklowo-metalowo-wodorkowe (NiMH) | |
| Betriebsdauer | 20 h | |
| Czas ładowania na akumulator | 3,5 h | |
| Seria | CTB2-G | |
| Zasilanie energią | Zasilanie akumulatorowe | |
| Hebellänge inklusive Werkskalibrierstichmaß | 208 mm | |
| Regulacja uaktywnienia | z regulacją | |
| Maßeinheit Drehmoment | Nm; lbf ft | |
| Drehmoment min., Nm | 2 | |
| Drehmoment min., lbf ft | 2 | |
| Drehmoment max., Nm | 10 | |
| Drehmoment max., lbf ft | 10 | |
| Ustawienie wartości powodującej zadziałanie | Z regulacją cyfrową | |
| Größe, Antriebs-Vierkant | 1/4 Zoll | |
| Anzeigeauflösung | 0,01 Nm | |
| Drehmoment-Einheit | Nm; kgf cm; lbf ft; lbf in | |
| Możliwość protokołowania danych | yes | |
| Schnittstelle | RS232C | |
| Zasada zadziałania | Wyzwolenie elektromechaniczne | |
| Sygnał wyzwalający | Akustyczny; Optyczny | |
| Feedback | Wskazujący | |
| Nadaje się do kalibracji | yes | |
| Zawartość | część pojedyncza | |
| Rodzaj produktu | Klucz dynamometryczny | |
| Kierunek dokręcania | Prawe-lewe | |
| Kształt złącza | Kwadrat napędowy | |
| Technika pomiarowa | elektryczne | |
| Funkcje pomiarowe | Moment obrotowy; Moment obrotowy dociągania | |
| Wskazanie | cyfrowy | |
| Zakres momentu obrotowego min. | 2 Nm | |
| Zakres momentu obrotowego maks. | 10 Nm | |
| Dokładność momentu obrotowego w prawo | 1 % | |
| Prüfprotokoll des Herstellers | tak | |
| Norma | DIN EN ISO 6789-2 | |
| Długość całkowita | 255 mm | |
| Gewicht gesamt | 460 g |
Identification & Classification
| Article number | 655360 10 | |
| EAN / GTIN | 4571141272954 | |
| Manufacturer number | CTB10N2X8D-G 220V |
Description
Version:
Sturdy test wrench with exchangeable ratchet and compact display and control unit. Visual and acoustic signal indicates achievement of the set torque visually and audibly. For right-hand and left-hand threads.
Memory: 999 measured value pairs.
Power supply: NiMH rechargeable battery, operates 20 hours on a charge, charging time 3.5 hours.
Memory: 999 measured value pairs.
Power supply: NiMH rechargeable battery, operates 20 hours on a charge, charging time 3.5 hours.
Units of measure: Nm, lbfft, lbfin, kgf·cm.
Application:
For quick checking of screw connections.
The screw connection is further rotated by a defined angle. The final torque required (TW) is used to automatically calculate and display the initial tightening torque (TA equivalent to TB) for the fastening.
The screw connection is further rotated by a defined angle. The final torque required (TW) is used to automatically calculate and display the initial tightening torque (TA equivalent to TB) for the fastening.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Supplied with:
Battery charger, instruction manual in German and English.
Optional extras:
Data cable No. 655265 (from RS232C to USB).
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.