{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Disc brush, silicon carbide (SiC), ⌀ 100 mm, Grit: 80
Article no.: 575012 80
Article code:
Product details
Technical Data
| Diameter of hole | 22 mm | |
| Material of base body | plastic | |
| Thickness of bristle fibres | 1.2 mm | |
| Material of bristle set | nylon | |
| Type of bristle set material | micro-abrasive | |
| Height of bristle set | 35 mm | |
| Diameter of brush | 100 mm | |
| With groove | yes | |
| Diameter of contact area | 100 mm | |
| Diameter of clamps | 106 | |
| Min. infeed | 0.8 mm | |
| Max. infeed | 1.5 mm | |
| Application type | machine-operated | |
| Holder | longitudinal slot | |
| Min. feed rate | 3,000 mm/min | |
| Max. feed rate | 5,500 mm/min | |
| Max. speed | 3,500 min-1 | |
| Abrasive media | silicon carbide (SiC) | |
| Grit | 80 | |
| Grit designation | coarse | |
| Typical application | deburring; finish grinding; polishing | |
| Type of product | disc brush | |
| Content | single part |
Identification & Classification
| Article number | 575012 80 | |
| EAN / GTIN | 4045197892638 | |
| Manufacturer number | 575012 80 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
Description
Version:
Disc brushes with extremely tightly packed abrasive bristles (right to the edge of the brush) embedded in the plastic pad. The bristles support each other, giving a highly stable shape. Very long working life.
Nylon bristles with very high silicon carbide grit content for general-purpose use.
With longitudinal groove for clamping on face mill arbors (DIN 6357) and combination face mill adapters (DIN 6358).
Nylon bristles with very high silicon carbide grit content for general-purpose use.
With longitudinal groove for clamping on face mill arbors (DIN 6357) and combination face mill adapters (DIN 6358).
Advantage:
- Workpiece rework directly after the machining process.
- Reproducible results due to constantly exposed grinding grit.
- Good process reliability thanks to high shape stability and shape accuracy.
- Quick and secure installation without further accessories.
- Very low radial run-out.
Application:
On CNC machining centres and when used by robots, preferably wet grinding with cooling lubricant. Machining of flat components: precise deburring, edge rounding, finish machining after milling, surface finishing e.g. of sealing and mating faces.
Note:
Special versions available on request.