{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning DNGA 150612, CBN (0°)
Article no.: 255451 G
Article code:
Product details
Technical Data
| Manufacturer’s designation | DNGA 150612 | |
| Base form | rhombic | |
| Thickness of insert S | 6.35 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 15.503 mm | |
| Height of cutting edge | 6.35 mm | |
| Diameter of insert d | 12.7 mm | |
| Corner radius R | 1.2 mm | |
| Corner angle | 55 degrees | |
| Rake angle | 0 degrees | |
| Setting angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 1.5 mm | |
| ISO-Code | DNGA 150612 | |
| Max. cutting depth ap max | 0.2 mm | |
| Machining group | H (hard materials) | |
| Cutting media, manufacturer’s designation | BU7220 | |
| Coating | uncoated | |
| Grade | BU7220 | |
| Insert thickness T | 6.35 mm | |
| Insert designation | DNGA 150612 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 2 pcs. | |
| Direction of action | neutral | |
| Suitable for material | hardened steel (H) | |
| Tolerance Class | G | |
| Finishing / roughing assignment | finishing | |
| Chip breaker | no | |
| Cutting conditions | interrupted | |
| Number of potential uses | 2 pcs. | |
| Weight | 17 g |
Identification & Classification
| Article number | 255451 G | |
| EAN / GTIN | 4045197895400 | |
| Manufacturer number | 255451 G | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
H
H
H
Description
Version:
Fitted with 2 cutters.
Description:
New type of CBN with a balanced combination wear-resistance and tensile strength for general-purpose use in hardened steel up to 67 HRC in combination with a special constitution. For use both in continuous cutting and also in slightly interrupted and heavily interrupted cutting.