{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling XDLW 120408 SR, for FeedKing HPC indexable face mills, HB7530
Article no.: 212968 ST900
Article code:
Product details
Technical Data
| Number of teeth | 4 pcs. | |
| ISO-Code | XDLW 120408 SR | |
| Insert thickness T | 4.76 mm | |
| Corner radius R | 0.8 mm | |
| Grade | HB7530 | |
| Coating | PVD | |
| Weight | 7 g | |
| Max. cutting depth ap | 1.8 mm; 1.8 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | XDLW 120408 SR | |
| Base form | base profile X | |
| Thickness of insert S | 4.76 mm | |
| Height of cutting edge | 4.76 mm | |
| Diameter of insert d | 12.7 mm | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| Cutting depth ap, min. | 0.15 mm | |
| Cutting depth ap, max. | 1.8 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 1.07 mm | |
| Tool material | Carbide | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | HB7530 | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Insert designation | XDLW 120408 SR | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Suitable for material | steel (P) | |
| Tolerance Class | L | |
| Machining strategy | HPC | |
| Type of fastening | hole | |
| Number of potential uses | 4 pcs. | |
| Content | single part | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 212968 ST900 | |
| EAN / GTIN | 4045197581747 | |
| Manufacturer number | 212968 ST900 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
320
P
270
P
230
Description
Note:
Standard application values for ae = 0.5 … 1×D / ap max