{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling XDPW 070308 SR, for FeedKing HPC indexable face mills, HB7720
Article no.: 212933 HART
Article code:
Product details
Technical Data
| Number of teeth | 4 pcs. | |
| ISO-Code | XDPW 070308 SR | |
| Insert thickness T | 3.18 mm | |
| Corner radius R | 0.8 mm | |
| Grade | HB7720 | |
| Coating | PVD | |
| Max. cutting depth ap | 0.85 mm; 0.85 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Cooling lubricant | yes | |
| Base form | base profile X | |
| Thickness of insert S | 3.18 mm | |
| Length of cutting edge l | 7.26 mm | |
| Height of cutting edge | 3.18 mm | |
| Diameter of insert d | 8 mm | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 15 degrees | |
| Normal clearance angle, main cutting edge | 15 degrees | |
| Cutting depth ap, min. | 0.15 mm | |
| Cutting depth ap, max. | 0.85 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.36 mm | |
| Tool material | Carbide | |
| Machining group | H (hard materials) | |
| Cutting media, manufacturer’s designation | HB7720 | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Insert designation | XDPW 070308 SR | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Suitable for material | hardened steel (H) | |
| Machining strategy | HPC | |
| Type of fastening | hole | |
| Number of potential uses | 4 pcs. | |
| Content | single part | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 212933 HART | |
| EAN / GTIN | 4045197812582 | |
| Manufacturer number | 212933 HART | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
H
100
H
80
H
50
Description
Note:
Standard application values for ae = 0.5 … 1×D / ap max