{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr katalogowy:
LUKAS ZY cylindrical mounted point for steel/cast steel 4x8 mm shank 3 mm grain 80
Nr art.: A200000408312
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Dane techniczne
| Opakowanie | luzem | |
| Zawartość | 1 szt. | |
| Opis formy | Kształt walcowy | |
| Średnica | 4 mm | |
| Długość główki | 8 mm | |
| Średnica trzonka | 3 mm | |
| Długość chwytu | 30 mm | |
| Uchwyt | Chwyt | |
| Spoiwo | ceramika | |
| Kod spoiwa | 7 | |
| Jednostka zawartości | szt. | |
| Rodzaj produktu | Ściernica trzpieniowa | |
| Rozmiar ziarna (siatka) | 80 siateczka | |
| Do materiału | stal; Staliwo; Stal ulepszana cieplnie. | |
| Grupa materiałów | metalowe | |
| Norma | EN 12413 |
Identyfikacja i klasyfikacja
| Numer artykułu | A200000408312 | |
| EAN / GTIN | 4027497012121 | |
| Numer producenta | A200000408312 | |
| Numer L | L50280 181 | |
| Producent/osoba odpowiedzialna | LUKAS-ERZETT Vereinigte Schleif- und Fräswerkzeugf, Gebrüder-Lukas-Straße 1, 51766 Engelskirchen, Deutschland, www.lukas-erzett.de |
Opis
Opis:
- Top-Features:
- perfect dimensional stability: Fits perfectly in the power tool
- Extremely hard and sharp for an impressively long tool life
- Stainless thanks to zinc-nickel coating
- Also machines hard materials efficiently
- No dangerous shank breakage thanks to high-quality steel shank
- Without chrome coating Benefits:
- The high-quality steel shank of the tool fits perfectly in the power tool. Jamming, slippage or even shaft breakage are a thing of the past.
- The high hardness and sharp grain of the aluminium oxide ensure a long tool life of this tool. It can also easily process hard materials.
Cecha szcz.:
- Tool shape: dished
- Grain size: 40
- n max.: 12200 (1/min)
- Product packaging: Box
- Lamellar flap disc type: SLTR with concave glass fibre carrier
- Abrasive: ZK (zirconia alumina)
- Safety standard: EN 13743
- V max.: 80 m/s
- Packaging labelling: LUKAS-ERZETT
- Tool holder: Bore
- Tool holder dimension: 22.23 mm
- Tool diameter: 125 mm
Zaleta:
- The tool’s lightweight, sturdy and elastic glass fibre backing delivers excellent surface results thanks to its flexibility. Its high resistance to breakage, low vibration during use and ease of handling make this tool perfect.
- Thanks to its multi-layer abrasive coating, this tool remains as sharp as when it was first used. When the upper pads wear down, the fresh abrasive surface of the pads underneath is exposed. This ensures that the tool has a long service life and delivers consistent performance.
- The flat arrangement of the optimally bonded crescent-shaped lamellae not only improves safety at work, but also reduces wear on the tool. The abrasive grain adheres particularly firmly to the backing and is utilised to the full. The outer surface of the tool contains a particularly high number of abrasive grains, resulting in a particularly high material removal rate per minute. Excellent results are guaranteed.
- Thanks to a high-quality resin system, this tool does not crack, even at high speeds or operating temperatures. In addition, the manufacturing process takes environmental protection into account and utilises state-of-the-art technologies with short curing times.
- Thanks to the self-sharpening effect of zirconia corundum, combined with the high hardness and sharpness of the abrasive grain, this tool achieves high material removal rates and a long service life, particularly on hard and tough materials such as stainless steel.
Zastosowanie:
- Steel and cast steel: best suitable
- Alloyed/cast steels: suitable
- Tool steel: suitable
- Rust-/acid-/and heat-resistant steel and cast steel: suitable
- Cast iron: best suitable
- Aluminium, magnesium and copper alloys: suitable
- Titanium and nickle alloys: suitable
- Plastic/Wood/Rubber: best suitable
Materiał:
- Stainless steel
- Steel
- Aluminum
- Cast iron
- Plastic and wood
Wskazówka:
- Perfect result even on uneven surfaces
- Suitable for standard band grinders: no LUKAS carriers or adapters required
- Long tool life on different materials, for fine and coarse grinding
- Flexible structure: near-zero vibration during use
- Good value for money thanks to regular aluminium oxide