{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling APET 180540 FR, for Softcut® mills, HU7810
Article no.: 215212 ALU
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | Softcut® | |
| Wet maximum | suitable | |
| Manufacturer’s designation | APET 180540 FR | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable | |
| Base form | pentagonal | |
| Insert width | 10.2 mm | |
| Blade thickness | 5.59 mm | |
| Insert length | 16.67 mm | |
| Insert version | right-hand | |
| Cutting edge length | 16.67 mm | |
| Cutting edge height | 5.59 mm | |
| Corner radius | 4 mm | |
| Corner chamfer length | 1.5 mm | |
| Corner chamfer angle | 90 degrees | |
| Corner angle | 78 degrees | |
| Rake angle | 28 degrees | |
| Setting angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 11 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 11 degrees | |
| Normal clearance angle (flat cutting edge) | 20 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 16.67 mm | |
| ISO-Code | APET 180540 FR | |
| Tool material | Carbide | |
| Machining group | N (non-ferrous metals) | |
| Tool application group | HU7810 | |
| Cutting media, manufacturer’s designation | HU7810 | |
| Coating | uncoated | |
| Grade | HU7810 | |
| Insert thickness | 5.56 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | AP1805403R | |
| Interface coding for insert according to ISO TS 13399-60 | AP1805403R | |
| Insert designation | APET 180540 FR | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | Aluminium; non-ferrous materials (N) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 2 pcs. | |
| Weight | 6 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 215212 ALU | |
| EAN / GTIN | 4045197673817 | |
| Manufacturer number | 215212 ALU | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
600
N
500
N
400
Description
Note:
Standard application values for ae = 0.3×D / ap = 5 mm, ap max = 9 mm.