{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Bearing extractor individual, Type: 0
Article no.: 884700 0
Article code:
Product details
Technical Data
| Manufacturer’s designation | 18 | |
| Capacity min. | 32 mm | |
| Capacity max. | 114 mm | |
| Max. clamping depth | 120 mm | |
| Performance | 3 t | |
| Length of draw bolt | 180 mm | |
| Connection thread | M10 | |
| Type of product | puller | |
| External hexagon drive | 13 mm | |
| Material | steel | |
| Content | single part |
Identification & Classification
| Article number | 884700 0 | |
| EAN / GTIN | 4021176075599 | |
| Manufacturer number | 18-0 | |
| Manufacturer/responsible person | Kleinbongartz & Kaiser oHG, Heinrich-Hertz-Straße 5, 40704 Hilden, Germany, www.kukko.com |
Description
Version:
Bearing separator of high-quality tool steel.
Separator: The quick-release semicircular jaws are symmetrically tensioned by a screw. This causes the wedge-shaped jaws to insert themselves between bearings and shaft.
Extractor: Used in conjunction with the separator to extract bearings from their seating (for this the draw bolts are screwed into the threaded holes in the separation jaws).
Separator: The quick-release semicircular jaws are symmetrically tensioned by a screw. This causes the wedge-shaped jaws to insert themselves between bearings and shaft.
Extractor: Used in conjunction with the separator to extract bearings from their seating (for this the draw bolts are screwed into the threaded holes in the separation jaws).
Application:
For the separation of tightly wedged ball bearings, gears, etc., if the gap is too small for normal extraction arms.
Suitable for:
Bearing separator No. 884600.: 0