{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Fine stoneware drill /tiles drill, ⌀: 5mm
Article no.: 787035 5
Article code:
Product details
Technical Data
| Cutter diameter, min. Dc min. | 5 mm | |
| Overall length L | 105 mm | |
| Tool material | Carbide | |
| Through-coolant | no | |
| Number of pieces | 2 pcs. | |
| Interface position | on the machine; on the machine | |
| Holder type, joint 1 | plain shank | |
| Holder type, joint 2 | bit hexagon shank | |
| Dry machining | suitable | |
| Shank diameter DS | 10 mm | |
| Size of bit hex according to DIN 3126 | E 6,3 | |
| Cooling lubricant | no | |
| Configurable | no | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| Machining group | O (other) | |
| Interface | joint 1; joint 2 | |
| Max. speed | 200 min-1 | |
| Cutting direction | right-hand cutting | |
| Tool version | steel support with soldered hard material cutter inserts to DIN ISO 513 (Hx, Cx, Bx, Dx) | |
| Machining method | drilling into solid material (BVB) | |
| Type of product | indexable drill | |
| Content | set |
Identification & Classification
| Article number | 787035 5 | |
| EAN / GTIN | 9002741169054 | |
| Manufacturer number | 0000300052100 | |
| Manufacturer/responsible person | ALPEN-MAYKESTAG GmbH, Urstein Nord 67, 5412 Puch bei Hallein, Austria, www.alpenmaykestag.com |
Description
Version:
2 pieces. A drill with a diamond-ground carbide tip with a patented centring tip for highly accurate start positioning and exact holes without break-outs. With 10 mm shank. A carbide drill for use in standard drill chucks. With 1/4 inch (E 6.3) hexagon shank.
Application:
For very hard stoneware tiles up to Mohs / scratch hardness class 9 and for glass and porcelain.
Note:
Not suitable for hammer drills. Maximum spindle speed 200 rpm. No cooling required.