{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Shrink-fit chuck, HSK-A 63 short, Clamping range ⌀ D1: 3mm
Article no.: 308183 3
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Schrumpffutter HSK-A 63 kurz | |
| Interface position | on the machine; on the workpiece | |
| Holder type | hollow shank taper HSK; plain shank | |
| Interface coding | HSK06300195; ZYL00300115 | |
| Holder shape | flat surface contact, standard taper form A; plain shank | |
| Holder version | metric with cooling lubricant holes; metric | |
| Holder size, metric | 63 mm; 3 mm | |
| Type of mounting | spigot; hole (internal mounting) | |
| Shank diameter DS | 3 mm | |
| Interface on workpiece side | plain shank | |
| Min. clamping diameter D1 | 3 mm | |
| Max. clamping diameter D1 | 3 mm | |
| Gauge length A | 80 mm | |
| External diameter, on the tool side D | 15 mm | |
| Concentricity | 3 µm | |
| Balance quality G at rotational speed | g 2.5 at 25,000 rpm | |
| Machining strategy | HPC; HSC | |
| Format | short | |
| Including length adjustment screw | no | |
| With tapped holes for balancing | no | |
| External diameter, 2 on the tool side D2 | 10 mm | |
| Interface | joint 1; joint 2 | |
| Type of product | shrink-fit chuck | |
| Overall length L | 112 mm | |
| Standard | DIN 69893; ISO 12164-1 | |
| Shape | A | |
| With hole for RFID data carrier | yes | |
| Through-coolant available | yes | |
| Material | steel | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 308183 3 | |
| EAN / GTIN | 2050001690067 | |
| Manufacturer number | 16.306.63.03.Z | |
| Manufacturer/responsible person | WTE Präzisionstechnik GmbH & Co. KG, Gewerbegebiet an der B95 2A, 09427 Ehrenfriedersdorf, Germany, www.wte.mapal.com |
Description
Version:
- High-temperature steel.
- Sizes 3 − 5 for carbide, from size 6 for HSS and carbide.
- With RFID/Balluffchip bore.
From clamping ⌀ D1 6 mm with tapped holes for balancing screws.
Integral length adjustment of the tool from clamping ⌀ D1 6 mm (adjustment travel 10 mm).
Application:
- For holding end mills and drills with parallel shank to h6 tolerance.
- Suitable for inductive, contact and hot air shrink-fit units.
Supplied with:
For chucks with length adjustment including a length adjustment screw (from clamping ⌀ D1 6 mm).