{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Shrink-fit chuck, HSK-A 63 short, Clamping range ⌀ D1: 16mm
Article no.: 308183 16
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Interface position | on the machine; on the workpiece | |
| Holder type | hollow shank taper HSK; plain shank | |
| Interface coding | HSK06300195; ZYL01600115 | |
| Holder shape | flat surface contact, standard taper form A; plain shank | |
| Holder version | metric with cooling lubricant holes; metric | |
| Holder size, metric | 63 mm; 16 mm | |
| Type of mounting | spigot; hole (internal mounting) | |
| Shank diameter DS | 16 mm | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Schrumpffutter HSK-A 63 kurz | |
| Interface on workpiece side | plain shank | |
| Min. clamping diameter D1 | 16 mm | |
| Max. clamping diameter D1 | 16 mm | |
| Gauge length A | 95 mm | |
| External diameter, on the tool side D | 34 mm | |
| Concentricity | 3 µm | |
| Balance quality G at rotational speed | g 2.5 at 25,000 rpm | |
| Machining strategy | HPC; HSC | |
| Format | short | |
| Including length adjustment screw | yes | |
| Adjustment travel V | 10 mm | |
| With tapped holes for balancing | yes | |
| Diameter outer 2 on the tool side D2 | 27 mm | |
| Interface | joint 1; joint 2 | |
| Type of product | shrink-fit chuck | |
| Overall length L | 127 mm | |
| Standard | DIN 69893; ISO 12164-1 | |
| Shape | A | |
| With hole for RFID data carrier | yes | |
| Through-coolant available | yes | |
| Material | steel | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 308183 16 | |
| EAN / GTIN | 2050001690142 | |
| Manufacturer number | 16.306.63.16.Z | |
| Manufacturer/responsible person | WTE Präzisionstechnik GmbH & Co. KG, Gewerbegebiet an der B95 2A, 09427 Ehrenfriedersdorf, Germany, www.wte.mapal.com |
Description
Izvedba:
- Jeklo, odporno proti visokim temperaturam.
- Vel. 3−5 za karbidno trdino, od vel. 6 za HSS in HM.
- Z izvrtino za čip RFID/Balluff.
Od ⌀ vpenjanja D1 6 mm z izvrtinami z navojem za centrirne vijake.
Vgrajena možnost vzdolžnega pomikanja orodja od ⌀ vpenjanja D1 6 mm (dolžina nastavljanja 10 mm).
Uporaba:
- Za vpenjanje rezkarjev in svedrov s cilindričnim držalom s toleranco h6.
- Primerno za induktivne, kontaktne in vročezračne nakrčevalne naprave.
Obseg dobave:
Pri glavah z vzdolžnim pomikanjem vklj. z vijakom za nastavljanje dolžine (od ⌀ vpenjanja D1 6 mm).