{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning CNGA 120404, CBN (0°)
Article no.: 255609 ME
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable only under restricted conditions | |
| Wet maximum | suitable only under restricted conditions | |
| Manufacturer’s designation | CNGA120404S01225ME KBN25M | |
| Dry machining | suitable | |
| Oil | suitable only under restricted conditions | |
| Air | suitable only under restricted conditions | |
| ESD protected area (EPA) | no | |
| EX area | no | |
| Base form | rhombic | |
| Insert width | 12.9 mm | |
| Blade thickness | 4.76 mm | |
| Insert length | 12.9 mm | |
| Insert version | neutral | |
| Cutting edge length | 12.9 mm | |
| Cutting edge height | 4.76 mm | |
| Insert diameter | 12.7 mm | |
| Corner radius | 0.4 mm | |
| Corner angle | 80 degrees | |
| Rake angle | 0 degrees | |
| ISO-Code | CNGA 120404 | |
| Tool material | BN | |
| Cutting media, manufacturer’s designation | KBN25M | |
| Coating | MEGACOAT | |
| Grade | KBN25M | |
| Insert thickness | 4.76 mm | |
| Type of fastening for insert | C (without hole clamped from above) | |
| Interface coding for insert | CN1204042N | |
| Interface coding for insert according to ISO TS 13399-60 | CN1204042N | |
| Insert designation | CNGA 120404 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | neutral | |
| Suitable for material | hardened steel (H) | |
| Finishing / roughing assignment | Finishing | |
| Facility for resharpening | no | |
| Type of fastening | clamping | |
| Chip breaker | no | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 2 pcs. | |
| Weight | 10 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 255609 ME | |
| EAN / GTIN | 4960664507061 | |
| Manufacturer number | TBZ01456 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
H
H
H
Description
Version:
MEGACOAT coated CBN inserts.
MultiEdge; 2 or 3 cutting edges per insert.