{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SOMT....20ER-LD, for high feed rate indexable face mills, PR1810
Article no.: 222083 10
Article code:
Product details
Technical Data
| Cutter version | rounded (E) | |
| Number of teeth | 4 pcs. | |
| ISO-Code | SOMT100420ER-LD | |
| Insert thickness T | 4.58 mm | |
| Corner radius R | 2 mm | |
| Coating | Megacoat Nano | |
| Max. cutting depth, Side milling | 3.5 mm | |
| Max. cutting depth, Full slot milling | 3.5 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | SOMT100420ER-LD PR1810 | |
| Base form | square | |
| Thickness of insert S | 4.76 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 10.3 mm | |
| Diameter of insert d | 10.3 mm | |
| Corner angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 16 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 16 degrees | |
| Attachment hole diameter | 4.6 mm | |
| Insert size L | 10 mm | |
| Cutting depth ap, max. | 3.5 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.06 mm | |
| Feed rate per tooth max. fz | 2 mm | |
| Tool material | Carbide | |
| Machining group | K (cast iron) | |
| Cutting media, manufacturer’s designation | PR1825 | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Insert designation | SOMT100420ER-LD | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Direction of action | right-hand | |
| Suitable for material | cast iron (K) | |
| Tolerance Class | M | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Number of potential uses | 4 pcs. | |
| Content | single part | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 222083 10 | |
| EAN / GTIN | 4960664026913 | |
| Manufacturer number | TLS00075 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
K
180
Description
Version:
4-edge indexable inserts with convex cutting edges for low cutting forces.
Application:
LD geometry is also suitable for high cutting depths (ap max= 5 mm) at moderate feed rates.
Do not use for helical, plunging or contour milling, or on steep walls.
Do not use for helical, plunging or contour milling, or on steep walls.
Note:
Standard application values for ae = 0.3×D.