{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SOMT....20ER-GM, for high feed rate indexable face mills, PR1835
Article no.: 222073 10
Article code:
Product details
Technical Data
| Manufacturer’s designation | SOMT....20ER-GM | |
| Base form | square | |
| Insert width | 10.3 mm | |
| Blade thickness | 4.58 mm | |
| Insert length | 10.3 mm | |
| Insert version | right-hand | |
| Cutting edge length | 10.3 mm | |
| Insert diameter | 10.3 mm | |
| Corner radius | 2 mm | |
| Corner angle | 90 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 90 degrees | |
| Setting angle | 10 degrees | |
| Normal clearance angle (main cutting edge) | 16 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 16 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| ISO-Code | SOMT100420ER-GM | |
| Attachment hole diameter | 4.6 mm | |
| Type of chip breaker | GM | |
| Tool material | Carbide | |
| Standard designation for cutting medium, 2nd Priority | HC-P35 | |
| Cutting media, manufacturer’s designation | PR1835 | |
| Coating | Megacoat Nano | |
| Insert thickness | 4.58 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Insert designation | SOMT100420ER | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | stainless steel (M) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 4 pcs. | |
| Weight | 2 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 222073 10 | |
| EAN / GTIN | 4960664029358 | |
| Manufacturer number | SOMT100420ER-GMPR1835 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
M
160
M
120
S
40
Description
Version:
4-edge indexable inserts with convex cutting edges for low cutting forces.
Application:
FL geometry is the first choice for general machining.
Note:
Standard application values for ae = 0.3×D.