{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling LOGU 030310 ER-GM, for high feed rate indexable face mills, CA6535
Article no.: 221976 S
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | LOGU 030310 ER-GM | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable | |
| Base form | rectangular | |
| Wide insert B | 6.2 mm | |
| Thickness of the insert S | 3.18 mm | |
| Length of cutting insert L | 11.9 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 11.9 mm | |
| Height of cutting edge | 3.96 mm | |
| Corner radius R | 1 mm | |
| Corner chamfer length C | 1.56 mm | |
| Corner chamfer angle | 75 degrees | |
| Corner angle | 90 degrees | |
| Rake angle | 0 degrees | |
| Setting angle | 6.5 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | LOGU 030310 ER-GM | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | Hochvorschubfräsen | |
| Cutting media, manufacturer’s designation | CA6535 | |
| Coating | TiCN | |
| Grade | CA6535 | |
| Insert thickness T | 3.18 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | LOGU 030310 ER-GM | |
| Insert designation | LOGU 030310 ER-GM | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Tolerance Class | G | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Machining strategy | HPC | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered and rounded (S) | |
| Cutting conditions | continuous | |
| Number of potential uses | 4 pcs. | |
| Weight | 3 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 221976 S | |
| EAN / GTIN | 4960664741656 | |
| Manufacturer number | TMA04200 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
S
30
Description
Version:
Double-sided indexable insert with 4 cutting edges. The convex cutting edge version of the insert ensures gentle entry of the cutting edge into the material.
Note:
Standard application values for ae = 0.3×D / ap max = 1 mm.