{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Alternative article:
-
Article no.: 221973 INOX
Indexable insert for milling LOGU 030310 ER-GM, for high feed rate indexable face mills, PR1535
Article no.: 221972 INOX
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | LOGU 030310 ER-GM PR1535 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rectangular | |
| Wide insert B | 6.2 mm | |
| Thickness of the insert S | 3.18 mm | |
| Length of cutting insert L | 11.9 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 11.9 mm | |
| Height of cutting edge | 3.96 mm | |
| Diameter of the cutting insert d | 6.2 mm | |
| Corner radius R | 1 mm | |
| Corner chamfer length C | 3.8 mm | |
| Corner chamfer angle | 6.5 degrees | |
| Corner angle | 90 degrees | |
| Rake angle | 0 degrees | |
| Setting angle | 75 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle, main cutting edge | 0 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | LOGU 030310 ER-GM | |
| Attachment hole diameter | 3.45 mm | |
| Type of chip breaker | GM | |
| Tool material | Carbide | |
| Machining group | M (stainless steel) | |
| Tool application group | M25 | |
| Cutting media, manufacturer’s designation | PR1535 | |
| Coating | Megacoat Nano | |
| Grade | PR1535 | |
| Insert thickness T | 3.18 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | LO0T3104R | |
| Interface coding for insert according to ISO TS 13399-60 | LO0T3104R | |
| Insert designation | LOGU 030310 ER-GM | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | stainless steel (M) | |
| Tolerance Class | G | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Number of potential uses | 4 pcs. | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 221972 INOX | |
| EAN / GTIN | 4960664741649 | |
| Manufacturer number | TLC04200 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
M
160
M
120
S
40
Description
Version:
Double-sided indexable insert with 4 cutting edges. The convex cutting edge version of the insert ensures gentle entry of the cutting edge into the material.
Note:
Standard application values for ae = 0.3×D / ap max = 1 mm.