{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling LOGU 030310 ER-GM, for high feed rate indexable face mills, PR1835
Article no.: 221973 INOX
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Manufacturer’s designation | LOGU 030310 ER-GM | |
| Base form | rectangular | |
| Wide insert | 6.2 mm | |
| Thickness of the insert | 3.96 mm | |
| Length of cutting insert | 11.9 mm | |
| Insert version | neutral | |
| Length of cutting edge | 11.9 mm | |
| Height of cutting edge | 3.96 mm | |
| Corner radius | 1 mm | |
| Corner chamfer length | 0 mm | |
| Corner chamfer angle | 0 degrees | |
| Corner angle | 90 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 10 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 16 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Normal clearance angle, main cutting edge | 0 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | LOGU 030310 ER-GM | |
| Attachment hole diameter | 3.45 mm | |
| Type of chip breaker | GM | |
| Tool material | HC-P35 | |
| Machining group, manufacturer-specific | INOX | |
| Machining group | M (stainless steel) | |
| Tool application group | HC-P35 | |
| Cutting media, manufacturer’s designation | PR1835 | |
| Coating | Megacoat Nano | |
| Insert thickness | 3.96 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | LO0303103R | |
| Interface coding for insert according to ISO TS 13399-60 | LO0303103R | |
| Insert designation | LOMU030310 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | stainless steel (M) | |
| Tolerance Class | G | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Machining strategy | HPC | |
| Facility for resharpening | no | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | continuous | |
| Number of potential uses | 4 pcs. | |
| Weight | 3 g | |
| Content | 1 pcs. | |
| Correction factor | 2.5 |
Identification & Classification
| Article number | 221973 INOX | |
| EAN / GTIN | 4960664029433 | |
| Manufacturer number | LOGU030310ER-GMPR1835 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
M
160
M
120
S
40
Description
Version:
Double-sided indexable insert with 4 cutting edges. The convex cutting edge version of the insert ensures gentle entry of the cutting edge into the material.
Note:
Standard application values for ae = 0.3×D / ap max = 1 mm.