{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling ONEU 05T6 ANER, for TwinCut face mills, HB7520
Article no.: 213432 ST1400
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | TwinCut | |
| Wet maximum | suitable | |
| Manufacturer’s designation | ONEU 05T6 ANER | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | octagonal | |
| Blade thickness | 6.1 mm | |
| Insert length | 14 mm | |
| Insert version | neutral | |
| Cutting edge length | 3 mm | |
| Cutting edge height | 5.795 mm | |
| Insert diameter | 14 mm | |
| Corner radius | 0.8 mm | |
| Corner angle | 135 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Point angle | 135 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | ONEU 05T6 ANER | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | HB7520 | |
| Coating | TiAlN | |
| Grade | HB7520 | |
| Insert thickness | 6.1 mm | |
| Type of fastening for insert | C (without hole clamped from above) | |
| Interface coding for insert | ON05T6AN3R | |
| Interface coding for insert according to ISO TS 13399-60 | ON05T6AN3R | |
| Insert designation | ONEU 05T6 ANER | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 16 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Tolerance Class | E | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | clamping | |
| Chip breaker | yes | |
| Cutter version | chamfered and rounded (S) | |
| Cutting conditions | continuous | |
| Number of potential uses | 16 pcs. | |
| Weight | 11 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 213432 ST1400 | |
| EAN / GTIN | 4045197879974 | |
| Manufacturer number | 213432 ST1400 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
170
P
150
Description
Version:
Double-sided with 2×8 cutting edges.
Recommendation:
For the best surface quality choose insert tolerance E in combination with wiper edge insert(s).
Note:
Standard application values for ae = 0.5 ... 1×D / ap max