{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling RDHW 1003 MOTN, for copy and face milling cutters, HB7505
Article no.: 212245 HART
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | RDHW 1003 MOTN | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable | |
| Base form | round | |
| Insert diameter | 10 mm | |
| Normal clearance angle, main cutting edge | 15 degrees | |
| ISO-Code | RDHW 1003 MOTN | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | Kopier- und Planfräsen | |
| Coating | PVD | |
| Grade | HB7505 | |
| Insert thickness | 3.18 mm | |
| Interface coding for insert | RD1003M03N | |
| Insert designation | RDHW 1003 MOTN | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 1 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Tolerance Class | H | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 1 pcs. | |
| Weight | 1 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 212245 HART | |
| EAN / GTIN | 4045197302489 | |
| Manufacturer number | 212245 HART | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
275
P
275
P
250
P
160
P
125
H
155
H
140
H
110
K
240
Description
Version:
All indexable inserts are suitable for use with carriers that are 0° negative and also with carriers that are 7° positive.
Note:
Standard application values for ae = 0.3×D / apmax = 2 mm.