{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master INOX solid carbide milling cutter with chip separators TPC, TiAlN, ⌀ f8 DC: 4mm
Article no.: 203116 4
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | Master Inox | |
| Wet maximum | suitable | |
| Manufacturer’s designation | GARANT Master INOX VHM-Fräser mit Spanteilern | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder shape | form B | |
| Holder version | metric | |
| Holder size, metric | 0060 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Shank diameter | 6 mm | |
| Shank length | 28 mm | |
| Holder diameter, ISO tolerance class | 6 mm | |
| Holder diameter, upper dimension | 0 mm | |
| Holder diameter, lower dimension | -0.008 mm | |
| Oil | suitable | |
| Shank type | HB | |
| Air | suitable only under restricted conditions | |
| Tool material | solid carbide | |
| Standard designation for cutting medium, 2nd Priority | HF-M30 | |
| Machining group, manufacturer-specific | HF | |
| Machining group | M (stainless steel) | |
| Tool application group | HF | |
| Cutting media, manufacturer’s designation | VHM ALTIN | |
| Coating | TiAlN | |
| Cutter diameter | 4 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance Class | f8 | |
| Neck diameter | 3.9 mm | |
| Cutting edge length | 11 mm | |
| Head length | 11 mm | |
| Shoulder length | 16 mm | |
| ISO milling cutter type | G | |
| Balancing quality | G2,5 mit HB | |
| Relief angle | 36 degrees | |
| Side rake angle | 0 degrees | |
| Number of effective cutters, peripheral side | 6 | |
| Number of effective cutters, end face | 6 | |
| Twist direction | right-hand | |
| Twist angle | 36 degrees | |
| Helical pitch | 0 mm | |
| Number of corner versions | 1 | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer width | 0.08 mm | |
| Corner chamfer angle | 45 degrees | |
| Spacing of the cutters | unequal spacing | |
| Cutting arc angle max. | 40.54 degrees | |
| Number of chip separators | 1 | |
| Direction of infeed | horizontal, oblique and vertical | |
| Helix angle characteristic | unequal spacing | |
| Interface | joint 1 | |
| Gauge length | 29 mm | |
| Usable length | 13 mm | |
| Overall length | 57 mm | |
| Functional length | 43 mm | |
| Max. speed | 45,000 min-1 | |
| Weight | 18 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Data carriers | without data carrier | |
| Machining method | End milling | |
| Colour ring | blue | |
| Machining strategy | TPC | |
| Type of product | shoulder mill | |
| Correction factor fz | 1.5 | |
| Cutting depth min. | 0.08 mm | |
| Max. cutting depth | 11 mm |
Identification & Classification
| Article number | 203116 4 | |
| EAN / GTIN | 4062406783440 | |
| Manufacturer number | 203116 4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
380
P
340
P
300
P
230
M
240
M
170
S
140
Description
Version:
High-performance milling cutter with irregular cutter spacing and irregular helical pitch. High process reliability and better chip evacuation due to increased flutes. Optimised carbide substrate for higher bending strength and extreme tool life, even in stainless steels in the high-performance field, especially duplex. Chip separator positioned offset at cutting edges.
Advantage:
Lower pull-out forces due to reduced helix angle.