{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Alternative article:
-
Article no.: 162826 5
Face reamer H7, uncoated, Nominal ⌀ DC: 5mm
Article no.: 162825 5
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Stirn-Reibahle H7 | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00500100 | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 0050 mm | |
| Shank diameter DS | 5 mm | |
| Shank length LS | 33 mm | |
| Holder diameter, ISO tolerance class | 5 mm | |
| Holder diameter, upper dimension | -0.02 mm | |
| Holder diameter, lower dimension | -0.05 mm | |
| Cutter diameter 1st step min. DC | 5 mm | |
| Configurable | no | |
| Boring out allowance | 0.1 mm | |
| Hole to be created 1st step, ISO tolerance class | H7 | |
| Hole to be created 1st step, upper dimension | 0.012 mm | |
| Hole to be created 1st step, lower dimension | 0 mm | |
| Cutting edge length LC | 20 mm | |
| Tap infeed length | 0 mm | |
| Number of teeth | 6 | |
| Twist direction | neutral, straight | |
| Helix angle max. | 0 degrees | |
| Taper lead angle | 0 degrees | |
| Type of reaming tool | for through holes and blind holes | |
| Guide elements present | yes | |
| Material of guide elements | uncoated carbides (HW) | |
| Type of drive | machine reamer | |
| Tool material | HSS-E | |
| Standard designation for cutting medium, 2nd Priority | HSS-E | |
| Standard designation for cutting medium, 3rd Priority | HSS-E | |
| Cutting media, manufacturer’s designation | HSS | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Gauge length A | 53 mm | |
| Usable length L1 | 50 mm | |
| Overall length L | 86 mm | |
| Functional length | 50 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | Werksnorm | |
| Machining method | core drilling (BAB) | |
| Colour ring | green | |
| Type of product | cylindrical reamer | |
| Content | single part |
Identification & Classification
| Article number | 162825 5 | |
| EAN / GTIN | 4062406117221 | |
| Manufacturer number | 162825 5 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
20
N
20
P
15
P
12
P
12
P
10
P
10
K
10
N
20
Description
Version:
Chucking reamer cutting on the end face to achieve the most accurate size possible. The optimised end face cutting enables a precise alignment fit of the hole that is produced. Straight flute machine chucking reamers with long flutes for optimum chip evacuation.
Application:
For production of sequential holes with alignments that exactly match. For the highest demands for straightness of holes. For reaming of through holes and right to the bottom of blind holes.
Note:
No. 162830 Configurable reamers are available in the diameter range from 2.200 to 12.220 mm and for any choice of fit.