{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Machine taper pin reamer, uncoated, Nominal ⌀ DC: 2mm
Article no.: 161600 2
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder version | metric | |
| Holder size, metric | 3,15 mm | |
| Holder tolerance class | h9 | |
| Shank diameter | 3.15 mm | |
| Cutter diameter 1st step min. | 2 mm | |
| Configurable | no | |
| Taper diameter min. | 1.9 mm | |
| Taper diameter max. | 2.86 mm | |
| Cutting edge length | 48 mm | |
| Twist direction | left-hand | |
| Helix angle max. | 45 degrees | |
| Taper ratio | 1:50 | |
| Type of reaming tool | for through holes | |
| Type of drive | machine reamer | |
| Tool material | HSS-E | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Overall length | 86 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 2179 | |
| Colour ring | without | |
| Type of product | taper reamer | |
| Content | single part |
Identification & Classification
| Article number | 161600 2 | |
| EAN / GTIN | 4045197510785 | |
| Manufacturer number | 161600 2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
20
N
20
P
15
P
10
P
7
Description
Version:
With 45° left hand helix, evacuates swarf in cutting direction.
Application:
On machines for tapered through holes. The peeling twist requires removal of a thick chip (pre-drilled hole must not be too large). For taper pins to ISO 2339, 8736, 8737 (DIN 1, 7977, 7978), DIN 258 and 1447.
Recommendation:
The pre-drilled hole is best produced using a straight shank taper pin drill No. 116310.