{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Machine tap for synchronised spindles HSS-E-PM Form E, TiAlN, M: M2,5
Article no.: 136173 M2,5
Copy
Article code:
Copy
- Thread type: M
- Flank angle: 60
- Tool material: HSS E PM
- Standard: Manufacturer’s standard
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M2.5 | |
| Coating | TiAlN | |
| Thread type | M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E PM | |
| Standard | Manufacturer’s standard | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 2X 6HX | |
| Taper lead form | E | |
| Helix angle | 40 degrees | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Application for type of drilling | up to 3×D for blind holes | |
| Cutting direction | right-hand | |
| Thread pitch | 0.45 mm | |
| Overall length L | 70 mm | |
| Shank ⌀ Ds | 6 mm | |
| Shank square □ | 4.9 mm | |
| Tapping hole ⌀ | 2.05 mm | |
| Thread ⌀ | 2.5 mm | |
| Shank tolerance | h6 | |
| Type of threading tool | Machine tap for synchronous machining | |
| Number of clamping slots | 3 | |
| Colour ring | green | |
| Number of cutting edges Z | 3 | |
| Thread depth | 7.5 mm | |
| Type of product | Taps |
Identification & Classification
| Article number |
136173 M2,5
Copy |
|
| EAN / GTIN |
4045197705242
Copy |
|
| Manufacturer number |
136173 M2,5
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
32
suitable for / [m/min]
N
ISO code:
32
suitable for / [m/min]
P
ISO code:
33
suitable for / [m/min]
P
ISO code:
32
suitable for / [m/min]
P
ISO code:
20
suitable for / [m/min]
P
ISO code:
12
suitable for / [m/min]
P
ISO code:
7
suitable for / [m/min]
M
ISO code:
11
suitable for / [m/min]
M
ISO code:
9
suitable for / [m/min]
N
ISO code:
30
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Sturdy design with right-hand chip flutes and shank to DIN 1835-B.
Special geometry for universal applications on machines with synchronised spindle drive. The tap is guided by the synchronised spindle on the machine. Special TiAlN-S coating for optimum tool life.
For use with emulsion (fat content minimum 8%).
Form E (lead chamfer: 1.5 - 2 turns) for the deepest possible thread depths.
Special geometry for universal applications on machines with synchronised spindle drive. The tap is guided by the synchronised spindle on the machine. Special TiAlN-S coating for optimum tool life.
For use with emulsion (fat content minimum 8%).
Form E (lead chamfer: 1.5 - 2 turns) for the deepest possible thread depths.