{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr kat.:
Band clamp BAN700
Nr art.: BAN700
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Identyfikacja i klasyfikacja
| Numer artykułu | BAN700 | |
| EAN / GTIN | 4008158023250 | |
| Numer producenta | BAN700 | |
| Numer L | L80040 1 | |
| Producent/osoba odpowiedzialna | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 Bietigheim-Bissingen, Deutschland, www.bessey.de |
Opis
Opis:
- Even pressure on mitre joints
- Crank handle can be relocated for right and left-handed users
- Contains: 1 band clamp, 4 Vario corners
- On carded hang pack
Cecha szcz.:
- Tape: 25x1 mm
- Material / surface:
- Upper and lower part made of reinforced PA6 plastic
- Spindle with trapezoidal thread made of steel rolled, burnished
- Wooden handle, water-based lacquer
- Polyester band
- Clamping circumference: Up to 7 m mm
- Angular range: 60°-180°
Zaleta:
Band is drawn in on both sides
- This ensures that the pressure is applied equally on all corners. This is just perfect for ensuring clamping without warpage.
- The intergrated coiling mechanism is operated by a crank handle which avoids tangling of and damage to the band. So you never need to worry about your band getting ″chewed up″ ever again!
- Whether you need high pressure on mitre joints or precise adjustment to corners: The practical Vario corners with tilting pressure plates perfectly complement the BESSEY band clamp.
- The special woven polyester clamping band guarantees a high resistance to tearing, and a clamping range of 7 m. The simply closing system can be opened at any time, quickly and simply.
Zastosowanie:
- Interior fittings
- DIY
- Furniture and joinery works
- For clamping frames and curves
Wskazówka:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Clean the rails with solvent
- Clean and oil the spindle regularly
- Clean in regular cycles, depending on the degree of soiling