{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr kat.:
Torque spanner MANOSKOP No. 714 Measuring range 2-20Nm Output L. 226mm
Nr art.: 96500902
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Dane techniczne
| maksymalny moment obrotowy | 20 Nm | |
| Seria | MANOSKOP® | |
| długość całkowita L | 226 mm | |
| Rodzaj produktu | Torque Wrench |
Identyfikacja i klasyfikacja
| Numer artykułu | 96500902 | |
| EAN / GTIN | 4018754222797 | |
| Numer producenta | 96500902 | |
| Numer L | L60010 4964 | |
| Producent/osoba odpowiedzialna | STAHLWILLE Eduard Wille GmbH, Lindenallee 27, 42349 Wuppertal, Deutschland, https://www.stahlwille.de |
Opis
Opis:
- Torque/angle spanner for screw connections according to the tightening method torque, angle of rotation, torque with monitoring variable ″angle of rotation″ and angle of rotation with monitoring variable ″torque″.
- Electromechanical-indicating (with electronic measurement) and triggering (with the familiar mechanical ″click″).
- Visual assessment of the screw fall.
- Simple documentation of the recorded measured values on the PC via the USB interface and via optional Bluetooth Low Energy module.
- Thanks to the combination of the patented electromechanical release and the display and acoustic feedback, the key offers maximum optimised signalling.
- Electromechanical release
- Acoustic and visual trigger signal
- 4 measuring modes (torque, angle of rotation, torque with monitoring variable ″angle of rotation″, angle of rotation with monitoring variable ″torque″)
- High-resolution colour OLED display and signal lights on the side
- Optical evaluation of the screwing case: Yellow light (pre-warning threshold reached), green light (in the target range), red light (measured value outside the tolerance range)
- Freely configurable menu structure
- Bayonet lock for battery/rechargeable battery
- Optional: Li-ion battery no. 7195-2 and charger no. 7160
- 3 function modes: Triggering (patented electromechanical triggering), Peak Hold (indicating operation with peak value display) and Track (indicating operation with actual value display)
- Micro-USB interface for data exchange
- Optional Bluetooth Low Energy module (5.2)
- QuickRelease safety lock - change system for insertion tools
- Data storage of up to 2,500 tightening operations including date and time stamp
- Up to 200 screwing operations can be programmed in a maximum of 25 sequence plans
- Various tolerance limits can be set depending on the screw joint
- Quick and precise adjustment via keypad
- No unintentional adjustment thanks to password-protected key lock
- Acoustic and visual signal warns of torque spanner overload and forced release in clockwise tightening mode
- Automatic notification of the next calibration date, freely configurable by time and/or number of loads
- Fully automatic calibration and adjustment with the perfectControl® calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factors
- Units of measurement: N-m, ft-lb, in-lb
- Automatic gauge block correction: Possibility to enter a deviating sample size to ensure the desired target value
- Immediately ready for operation again after unloading
- Right and left-hand tightening - the insertion tool must be rotated for left-hand tightening in the ″triggering″ function mode
- Torque and rotation angle displays visible simultaneously
- Measurement independent of the force application point (for sizes 1, 2 and 4)
- Safe handling thanks to ergonomically shaped 2-component handle (resistant to the most common oils, greases, fuels, brake fluids and Skydrol)
- 3 certificates enclosed (torque indicating/releasing according to DIN EN ISO 6789-2):2017, angle of rotation based on VDI/VDE 2648-2)
- in a sturdy plastic case (sizes 40-100 in a sheet steel case)
- registered design, patented
- Supplied with SensoMaster 4 software, USB cable, 4 AAA/LR03 micro batteries, 1.5 V
- Display resolution angle of rotation 0.1°
- Display deviation angle of rotation ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digit
- Display resolution torque ≤ 60 N-m: 0.01 N·m; > 60 N-m: 0.1 N·m; > 400 N-m: 1 N·m
- Display deviation torque ± 2 %, ± 1 digit
Cecha szcz.:
- Size: 2
- Height mm (h): 23 mm
- Length mm (L): 226 mm
- LF: 188 mm
- Measuring range ft-lb: 1.5-15 ft·lb
- Measuring range N-m: 2-20 N·m.
- SF: 17.5 mm
- Size of tool holder [inside4kt]: 9 x 12 mm
- Weight: 380g
- Weight with box: 805g
- Width mm (b): 28 mm