{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Plaquette de fraisage AOMT110404 ER, pour fraise Softcut®90°, HB7510-1
Réf.: 215431 ST900
Référence:
Détails du produit
Caractéristiques techniques
| Cooling lubricant | yes | |
| Series | Softcut 90° | |
| Manufacturer’s designation | AOMT110404 ER | |
| Base form | square | |
| Wide insert B | 7.5 mm | |
| Thickness of the insert S | 4.76 mm | |
| Length of cutting insert L | 12.5 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 12.5 mm | |
| Height of cutting edge | 4.1 mm | |
| Corner radius R | 0.4 mm | |
| Corner chamfer length C | 0 mm | |
| Corner chamfer angle | 0 degrees | |
| Corner angle | 90 degrees | |
| Rake face chamfer width C | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 28 degrees | |
| Normal clearance angle (main cutting edge) | 13 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 20 degrees | |
| Normal clearance angle (flat cutting edge) | 20 degrees | |
| Cutting conditions | interrupted | |
| ISO-Code | AOMT110404 ER | |
| Attachment hole diameter | 3.4 mm | |
| Type of chip breaker | EL-U | |
| Tool material | HC-P20 | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | HB7510-1 | |
| Coating | CVD | |
| Insert thickness T | 4.76 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | AO110404R | |
| Interface coding for insert according to ISO TS 13399-60 | AO110404R | |
| Insert designation | AOMT110404 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 2 pcs. | |
| Weight | 3 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification et classification
| Référence article | 215431 ST900 | |
| EAN / GTIN | 4069515039161 | |
| Réf. fabricant | 215431 ST900 | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Tableau d’application
P
340
P
300
P
260
Description
Remarque(s):
Valeurs indicatives d’utilisation pour ae = 0,5×D / ap = 3 mm, ap max = 5,5 mm.