{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
N.º de cat.:
Fresa de disco, Sin revestimiento, ⌀×ancho js16×k11: 80X10mm
Número de artículo: 185820 80X10
Código del artículo:
Detalles de producto
Datos técnicos
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Cutter diameter | 80 mm | |
| Diameter of mounting hole | 27 mm | |
| Cutting width | 10 mm | |
| ISO milling cutter type | double-sided side milling cutter | |
| Setting angle | 90 degrees | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Number of cutters (peripheral side) | 16 | |
| Tooth pitch | 15.71 mm | |
| Corner version | sharp-edged | |
| Tool material | HSS | |
| Cutting media, manufacturer’s designation | HSS-CO5 | |
| Coating | uncoated | |
| Usable length | 10 mm | |
| Overall length | 10 mm | |
| Functional length | 10 mm | |
| Weight | 200 g | |
| Cutting direction | right-hand cutting; right-hand cutting | |
| Standard | DIN 885 A | |
| Machining method | parting-off milling; slot milling | |
| Colour ring | without | |
| Type of product | side milling cutter | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth | 13.25 mm; 17.67 mm |
Identificación y clasificación
| Número de artículo | 185820 80X10 | |
| EAN / GTIN | 4045197097972 | |
| Número del fabricante | 185820 80X10 | |
| Fabricante/responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Tablas de Aplicación
N
200
P
19
P
19
P
19
M
9
N
180
Descripción
Version:
Staggered teeth with collar and keyway.
Application:
For slotting or cutting-off when the side faces of the component must have an accurate and clean surface.
Note:
fz for ae = 0.1×D.