{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Three-jaw lathe chuck steel with recessed mount DIN 702-4
Article no.: 310505
Article code:
Description
Version:
- Manual chucks with gear scroll, centrically clamping.
- Weight-reduced body of steel.
- Gear scroll drop-forged, balanced, and hardened.
- Flanks of scroll and of jaw serrations are ground.
- High concentricity.
Application:
For machine spindles with recessed centring mount or for mounting using a flange. Secured with screws from the rear. The flange blanks must always be fitted first to the machine and then to the chuck.
Standard:
DIN 702-4.
Supplied with:
1 clamping wrench and fastening screws or studs depending on the chuck.
1 set = 3 hard inside jaws, stepped on the outside and 1 set = 3 hard inside jaws, stepped on the inside.
1 set = 3 hard inside jaws, stepped on the outside and 1 set = 3 hard inside jaws, stepped on the inside.