{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Steel strap cutter D122N
Article no.: D122N
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Quality and test seal | none | |
| ESD protected area (EPA) | no | |
| Colour | green | |
| Type of product | special shears | |
| Cutting edge length | 31 mm | |
| Scissors features | one-hand | |
| Suitable for thickness | Metal | |
| Max. material thickness, metal | 0.6 mm | |
| Material | chromium vanadium steel | |
| Surface | galvanised; painted | |
| Overall length | 225 mm | |
| Material of handle | steel | |
| Content | single part |
Identification & Classification
| Article number | D122N | |
| EAN / GTIN | 4010220020616 | |
| Manufacturer number | D122N | |
| L-Number | L80080 33 | |
| Manufacturer/responsible person | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 Bietigheim-Bissingen, Germany, www.bessey.de |
Description
Description:
- The lower holder prevents band ends from springing up
- For band width up to 25 mm, band thickness up to 0.6 mm
- Flat lower jaw easily slips under taut banding
- Painted handles
Feature:
- Overall length: 225 mm
- Overall length: 9″
- Material / surface:
- Scissor parts made of forged steel, handle ends coated
- Steel fasteners, galvanized
- Cutting length: 1 1/4″
- Cutting length: 31 mm
Application:
- Interior fittings
- Shell construction
- Metal construction
- Furniture and joinery works
- Dry construction
- Carpentry and woodwork
- Plumbing
- One-handed cutting of strong steel straps
Note:
- Danger warnings:
- Manual sheet metal snips may only be used to cut thin sheets of soft metals or steel. They are not suitable for cutting through round or rectangular section metal shapes such as wires.
- Cutting tools may only be used manually without using any auxiliary tools.
- Always wear safety goggles and gloves when working. Cut parts can injure workers and bystanders.
- Improper use can cause personal injuries or material damage.
- Disconnect the connection to the power supply when carrying out work on electrical equipment. Otherwise, you may get an electric shock.
- Always cut away from the head when using snips and knives.
- Always store cutting tools with the cutting edges closed and in a location where they are clearly visible. The handle must be pointing towards you.
- Store cutting tools separately. This saves the cutting edges and your fingers.
- Sharpen cutting tools regularly. Blunt tools increase the risk of injury and require more force for the same cutting performance.
- Care instructions:
- Clean the rails with solvent
- Regularly oil the screw connections on the inside of the blade
- If the snips exhibit too much play, adjust the screw. (It must still be possible to open and close the shears easily)