{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
LUKAS mounted point set 10 parts for stainless steel/steel shank 3x50 mm NDW/ ceramic grain 100
Article no.: A201000000353
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Colour, grey | Grey blue | |
| Part described | Schleifstiftkörper; Aufbewahrungsbehälter | |
| Packaging | box | |
| Content | 10 pcs. | |
| Description of shape | cylindrical shape | |
| Diameter of head | 3 mm | |
| Diameter of shaft | 3 mm | |
| Length of shank | 50 mm | |
| Propulsive equipment | straight die grinder | |
| Holder | shank | |
| Binding | ceramic | |
| Bond code | 115 | |
| Colour | grey; red | |
| Contents unit | pieces | |
| Type of product | Grinding point | |
| Grit size (mesh) | 100 mesh | |
| Suitable for material | stainless steel; steel | |
| Material group | Metal | |
| Suitable for | surface grinding | |
| Standard | EN 12413 |
Identification & Classification
| Article number | A201000000353 | |
| EAN / GTIN | 4027497251018 | |
| Manufacturer number | A201000000353 | |
| L-Number | L50280 275 | |
| Manufacturer/responsible person | LUKAS-ERZETT Vereinigte Schleif- und Fräswerkzeugf, Gebrüder-Lukas-Straße 1, 51766 Engelskirchen, Germany, www.lukas-erzett.de |
Description
Feature:
- Tool shape: flat
- Grain size: 80
- n max.: 30000 (1/min)
- Product packaging: Box
- Abrasive: NK (regular aluminium oxide)
- V max.: 25 m/s
- Packaging labelling: LUKAS-ERZETT
- Tool holder: Hooked fabric
- Tool diameter: 45 mm
Advantage:
- The flexible, lightweight, stable and elastic glass fabric carrier of the tool allows for exceptional surface results. The high resistance to shredding and minimal vibration during operation, not to mention its easy handling, perfectly round off this tool.
- Thanks to the multi-layer coating, this tool is always as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality.
- A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.
- The aluminium oxide used on this tool impresses with a good tool life on structural steel and for rough and coarse grinding. It allows you to work in a cost-effective manner.
Application:
- Steel and cast steel: suitable
- Alloyed/Quenched and tempered steels: suitable
Material:
- Stainless steel
- Steel
- Aluminum
Note:
- Lightweight carrier material for low tool weight
- Maximum tool life thanks to multi-layer abrasive coating
- Self-sharpening effect: high removal rate especially on stainless steel
- High safety: unbreakable glass-fibre
- Fresh abrasive coating every time: wear exposes the flaps underneath
- With rectangular flaps for a very good value for money
- Secure working even at high operating speeds and temperature thanks to special resin bond
- Extremely hard and sharp for an impressively long tool life
- Elastic carrier material: low vibration when working
- Environmentally friendly production using state-of-the-art resin curing technology