{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Burr GARANT Master Alu − very rough (non-ferrous / aluminium), Carbide DLC, Type: AS0616
Article no.: 547600 AS0616
Article code:
Offers
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | suitable only under restricted conditions | |
| Series | GARANT Master Alu | |
| Wet maximum | suitable | |
| Manufacturer’s designation | Frässtift GARANT Master Alu − sehr grob (NE / Alu), HM DLC, Typ: AS0616 | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder version | metric | |
| Holder size, metric | 6 mm | |
| Dry machining | suitable | |
| Shank diameter | 6 mm | |
| Shank length | 34 mm | |
| Oil | suitable | |
| Air | suitable | |
| ESD protected area (EPA) | no | |
| Tool material | Carbide | |
| Machining group | N (non-ferrous metals) | |
| Coating | DLC | |
| Cutter diameter | 6 mm | |
| Cutting edge length | 16 mm | |
| Head length | 16 mm | |
| Burr, type of end face | with end cut | |
| Twist direction | right-hand | |
| Burr shape | cylindrical burr | |
| Spacing of the cutters | the same | |
| Type of cut | single toothing | |
| Toothing grit designation | very coarse | |
| Interface | joint 1 | |
| Usable length | 16 mm | |
| Overall length | 50 mm | |
| Functional length | 16 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 8033 | |
| Machining method | profile milling | |
| Colour ring | without | |
| Type of product | burr |
Identification & Classification
| Article number | 547600 AS0616 | |
| EAN / GTIN | 4067263736400 | |
| Manufacturer number | 547600 AS0616 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
Description
Version:
GARANT burrs are manufactured from the highest quality carbide with high wear resistance and maximum cutting edge strength, using only the latest CNC machines. Steel shanks are used when the head diameter is larger than the shank diameter, otherwise they are made from solid carbide.
The newly developed innovative tooth geometry permits very high metal removal rates combined with smooth cutting and good guidance accuracy. No chip adhesion and excellent surface results. Shank ⌀ 6mm. Suitable for use in roughing and finishing applications. With high-performance coating for longer tool life, less heat input and reduced chip adhesion.
The newly developed innovative tooth geometry permits very high metal removal rates combined with smooth cutting and good guidance accuracy. No chip adhesion and excellent surface results. Shank ⌀ 6mm. Suitable for use in roughing and finishing applications. With high-performance coating for longer tool life, less heat input and reduced chip adhesion.
- High rate of material removal.
- Smooth running.
- High-performance coating for low thermal stress, longer tool life, and improved chip evacuation.
- State-of-the-art substrate optimised for aluminium materials.
- Maximum tool life.
Cylindrical shape (ZYAS), with end cut.
Application:
Optimised for machining hard and soft aluminum alloys, plastics, bronze and non-ferrous metals. Suitable for both manual and industrial robots. For deburring, edge breaking, cleaning, weld and surface preparation.
Note:
Materials with poor heat conductivity; reduce speed to avoid overheating of the burr and smearing.