{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Gauge block set Ceramic, tolerance class 1, Number of gauge blocks: 47
Article no.: 481310 47
Article code:
Product details
Technical Data
| Number of tools | 47 pcs. | |
| Packaging | box | |
| Test certificate | manufacturer’s test certificate | |
| Surface | ground; lapped | |
| Number of gauge blocks | 47 | |
| Hardness | 1,350 HRC | |
| Material | zirconium Oxide (ZrO2) ceramic material | |
| Nominal size | 1 mm; 1.005 mm; 1.01 mm; 1.19 mm; 1.2 mm; 1.9 mm; 10 mm; 100 mm; 9 mm | |
| Standard | DIN EN ISO 3650 | |
| Tolerance Class | 1 | |
| Type of product | gauge block | |
| Can be calibrated | yes | |
| Content | set/ assortment |
Identification & Classification
| Article number | 481310 47 | |
| EAN / GTIN | 4946368220123 | |
| Manufacturer number | 516-363-10 | |
| Manufacturer/responsible person | Mitutoyo Deutschland GmbH, Borsigstraße 8-10, 41469 Neuss, Germany, www.mitutoyo.de |
Description
Version:
Made of ultra-pure ceramic zirconium dioxide (ZrO2) manufactured in a sintering process.
- Hardness: With approx. 1350 HV about twice as hard as steel.
- Tensile strength: Up to approx. 70 % of the flexural strength of steel. Insensitive to shock and impact.
- Wear resistance: Lasts about 10 times longer than steel. No burr formation. No plastic deformation. Scratches and small defects have no influence on the measured result. The surface remains slip capable longer than steel.
- Handling / care: Highly resistant to alkalis, acids, oil, and grinding water. No need for time-intensive degreasing before use and re-greasing after use which is required for steel. Low weight is an advantage for large sizes.
- Temperature characteristics: Coefficient of expansion (9.5 ±1.0) 10−6 K−1 similar to that of steel. Low thermal conductivity.
- Anti-magnetic: Cannot be magnetised.
- Slip capability: The homogeneous, high density structure gives optimum holding, even to steel, and easy slip capability. Galling is excluded.
- Test certificate: Each gauge block is provided with its own unique identity number. The actual deviation from the nominal dimensions is recorded in the test certificate. The absolute actual dimension is therefore known. Manufacturer’s test certificate traceable back to national standards.
Application:
Tolerance class 1 as working and adjusting master for gauge checking. For inspection rooms.
Content:
1 pc. each of size: 1.005; 20; 30; 40; 50; 60; 70; 80; 90; 100 mm
Graduation 0.01: 21 pcs. 1.00 − 1.20 mm
Graduation 0.1: 8 pcs. 1.3 − 2.0 mm
Graduation 1.0: 8 pcs. 3 − 10 mm
Graduation 0.01: 21 pcs. 1.00 − 1.20 mm
Graduation 0.1: 8 pcs. 1.3 − 2.0 mm
Graduation 1.0: 8 pcs. 3 − 10 mm