{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Disk, Type: SET
Article no.: 358982 SET
Article code:
New product
Product details
Technical Data
| Manufacturer’s designation | Insight KB | |
| EX area | no | |
| Colour | transparent | |
| Type of product | protective film | |
| Film thickness | 0.3 | |
| Characteristics | water-resistant | |
| Reusable | no | |
| With adhesive strip | yes | |
| Content | 3 pcs. |
Identification & Classification
| Article number | 358982 SET | |
| EAN / GTIN | 4170000215677 | |
| Manufacturer/responsible person | INSIGHT KB GmbH, Im Gewerbepark 15, 79252 STEGEN, Germany, http://www.insight-kb.com |
Description
Version:
With Insight KB, you can visually monitor the process in the machine room at all times. The machine becomes easier to operate and the entire work process becomes much more efficient and safer, and the scrap costs are reduced.
- Beading effect due to a special coating.
- Low installation height of 0.3 mm.
- No screws required for installation, easy to apply thanks to a special adhesive layer.
- Includes installation kit.
Advantage:
- The position on the machine’s protective screen can be freely selected.
- Minimal installation work required.
- Can be used flexibly, also suitable for curved screens.
- Easy to replace.
- No screws required for installation, easy to apply thanks to a special adhesive layer.
- Production can start immediately after it has been installed.
- Beading effect due to a special coating.
- Made in Germany.
Supplied with:
3 disks (No. 358932 310), 1 squeegee, 1 cloth.
Note:
The Clear View Disk is not intended for use in explosive atmospheres (ATEX). Dry machining and very sharp/hot chips, e.g. during high feed rate milling, can damage the surface and reduce its effectiveness.